Dev

CableTestBench.pro

@@ -33,7 +33,11 @@ SOURCES += \
     Sources/CableTestEngine.cpp \
     Sources/OptionsPage.cpp \
     Sources/CableTestBenchDefs.cpp \
-    Sources/IOModulesInterface.cpp
+    Sources/IOModulesInterface.cpp \
+    Sources/InputConnector.cpp \
+    Sources/OutputConnector.cpp \
+    Sources/CableParametersData.cpp \
+    Sources/AutomatedTestReport.cpp
 
 HEADERS  += \
     Sources/MainWindow.h \
@@ -53,7 +57,12 @@ HEADERS  += \
     Sources/TestReport.h \
     Sources/CableTestEngine.h \
     Sources/OptionsPage.h \
-    Sources/IOModulesInterface.h
+    Sources/IOModulesInterface.h \
+    Sources/InputConnector.h \
+    Sources/OutputConnector.h \
+    Sources/TestBenchVersion.h \
+    Sources/CableParametersData.h \
+    Sources/AutomatedTestReport.h
 
 FORMS += \
     Sources/CMainPage.ui \

CableTestBench.pro.user

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE QtCreatorProject>
-<!-- Written by Qt Creator 2.6.2, 2019-05-03T13:46:28. -->
+<!-- Written by Qt Creator 2.6.2, 2019-05-08T14:15:28. -->
 <qtcreator>
  <data>
   <variable>ProjectExplorer.Project.ActiveTarget</variable>

Makefile

@@ -1,6 +1,6 @@
 #############################################################################
 # Makefile for building: CableTestBench
-# Generated by qmake (2.01a) (Qt 4.8.1) on: Fri May 3 13:12:37 2019
+# Generated by qmake (2.01a) (Qt 4.8.1) on: Wed May 8 14:10:10 2019
 # Project:  CableTestBench.pro
 # Template: app
 # Command: c:\Qt\4.8.1\bin\qmake.exe -spec ..\..\Qt\4.8.1\mkspecs\win32-g++ CONFIG+=declarative_debug -o Makefile CableTestBench.pro

Makefile.Debug

@@ -1,6 +1,6 @@
 #############################################################################
 # Makefile for building: CableTestBench
-# Generated by qmake (2.01a) (Qt 4.8.1) on: Fri May 3 13:12:37 2019
+# Generated by qmake (2.01a) (Qt 4.8.1) on: Wed May 8 14:10:10 2019
 # Project:  CableTestBench.pro
 # Template: app
 #############################################################################
@@ -58,7 +58,11 @@ SOURCES       = Sources\MainWindow.cpp \
 		Sources\CableTestEngine.cpp \
 		Sources\OptionsPage.cpp \
 		Sources\CableTestBenchDefs.cpp \
-		Sources\IOModulesInterface.cpp debug\moc_MainWindow.cpp \
+		Sources\IOModulesInterface.cpp \
+		Sources\InputConnector.cpp \
+		Sources\OutputConnector.cpp \
+		Sources\CableParametersData.cpp \
+		Sources\AutomatedTestReport.cpp debug\moc_MainWindow.cpp \
 		debug\moc_MainPage.cpp \
 		debug\moc_CableTestBench.cpp \
 		debug\moc_VisualInspectionPage.cpp \
@@ -67,7 +71,10 @@ SOURCES       = Sources\MainWindow.cpp \
 		debug\moc_ConnectorClickZoneWidget.cpp \
 		debug\moc_ONOFFStatusWidget.cpp \
 		debug\moc_ConnectorTestVisualizationWidget.cpp \
-		debug\moc_OptionsPage.cpp
+		debug\moc_CableTestEngine.cpp \
+		debug\moc_OptionsPage.cpp \
+		debug\moc_IOModulesInterface.cpp \
+		debug\moc_AutomatedTestReport.cpp
 OBJECTS       = debug/MainWindow.o \
 		debug/main.o \
 		debug/MainPage.o \
@@ -86,6 +93,10 @@ OBJECTS       = debug/MainWindow.o \
 		debug/OptionsPage.o \
 		debug/CableTestBenchDefs.o \
 		debug/IOModulesInterface.o \
+		debug/InputConnector.o \
+		debug/OutputConnector.o \
+		debug/CableParametersData.o \
+		debug/AutomatedTestReport.o \
 		debug/moc_MainWindow.o \
 		debug/moc_MainPage.o \
 		debug/moc_CableTestBench.o \
@@ -95,7 +106,10 @@ OBJECTS       = debug/MainWindow.o \
 		debug/moc_ConnectorClickZoneWidget.o \
 		debug/moc_ONOFFStatusWidget.o \
 		debug/moc_ConnectorTestVisualizationWidget.o \
-		debug/moc_OptionsPage.o
+		debug/moc_CableTestEngine.o \
+		debug/moc_OptionsPage.o \
+		debug/moc_IOModulesInterface.o \
+		debug/moc_AutomatedTestReport.o
 DIST          = 
 QMAKE_TARGET  = CableTestBench
 DESTDIR        = debug\ #avoid trailing-slash linebreak
@@ -133,7 +147,7 @@ dist:
 	$(ZIP) CableTestBench.zip $(SOURCES) $(DIST) CableTestBench.pro ..\..\Qt\4.8.1\mkspecs\qconfig.pri ..\..\Qt\4.8.1\mkspecs\modules\qt_webkit_version.pri ..\..\Qt\4.8.1\mkspecs\features\qt_functions.prf ..\..\Qt\4.8.1\mkspecs\features\qt_config.prf ..\..\Qt\4.8.1\mkspecs\features\exclusive_builds.prf ..\..\Qt\4.8.1\mkspecs\features\default_pre.prf ..\..\Qt\4.8.1\mkspecs\features\win32\default_pre.prf ..\..\Qt\4.8.1\mkspecs\features\debug.prf ..\..\Qt\4.8.1\mkspecs\features\debug_and_release.prf ..\..\Qt\4.8.1\mkspecs\features\default_post.prf ..\..\Qt\4.8.1\mkspecs\features\win32\default_post.prf ..\..\Qt\4.8.1\mkspecs\features\build_pass.prf ..\..\Qt\4.8.1\mkspecs\features\declarative_debug.prf ..\..\Qt\4.8.1\mkspecs\features\win32\rtti.prf ..\..\Qt\4.8.1\mkspecs\features\win32\exceptions.prf ..\..\Qt\4.8.1\mkspecs\features\win32\stl.prf ..\..\Qt\4.8.1\mkspecs\features\shared.prf ..\..\Qt\4.8.1\mkspecs\features\warn_on.prf ..\..\Qt\4.8.1\mkspecs\features\qt.prf ..\..\Qt\4.8.1\mkspecs\features\win32\thread.prf ..\..\Qt\4.8.1\mkspecs\features\moc.prf ..\..\Qt\4.8.1\mkspecs\features\win32\windows.prf ..\..\Qt\4.8.1\mkspecs\features\resources.prf ..\..\Qt\4.8.1\mkspecs\features\uic.prf ..\..\Qt\4.8.1\mkspecs\features\yacc.prf ..\..\Qt\4.8.1\mkspecs\features\lex.prf ..\..\Qt\4.8.1\mkspecs\features\include_source_dir.prf c:\Qt\4.8.1\lib\qtmaind.prl  HEADERS RESOURCES IMAGES SOURCES OBJECTIVE_SOURCES FORMS YACCSOURCES YACCSOURCES LEXSOURCES 
 
 clean: compiler_clean 
-	-$(DEL_FILE) debug\MainWindow.o debug\main.o debug\MainPage.o debug\CableTestBench.o debug\VisualInspectionPage.o debug\ConnectorSelectWidget.o debug\CableTestPage.o debug\ConnectorClickZoneWidget.o debug\ONOFFStatusWidget.o debug\ConnectorTestVisualizationWidget.o debug\Connector.o debug\Cable.o debug\VisualInspectionResult.o debug\TestReport.o debug\CableTestEngine.o debug\OptionsPage.o debug\CableTestBenchDefs.o debug\IOModulesInterface.o debug\moc_MainWindow.o debug\moc_MainPage.o debug\moc_CableTestBench.o debug\moc_VisualInspectionPage.o debug\moc_ConnectorSelectWidget.o debug\moc_CableTestPage.o debug\moc_ConnectorClickZoneWidget.o debug\moc_ONOFFStatusWidget.o debug\moc_ConnectorTestVisualizationWidget.o debug\moc_OptionsPage.o
+	-$(DEL_FILE) debug\MainWindow.o debug\main.o debug\MainPage.o debug\CableTestBench.o debug\VisualInspectionPage.o debug\ConnectorSelectWidget.o debug\CableTestPage.o debug\ConnectorClickZoneWidget.o debug\ONOFFStatusWidget.o debug\ConnectorTestVisualizationWidget.o debug\Connector.o debug\Cable.o debug\VisualInspectionResult.o debug\TestReport.o debug\CableTestEngine.o debug\OptionsPage.o debug\CableTestBenchDefs.o debug\IOModulesInterface.o debug\InputConnector.o debug\OutputConnector.o debug\CableParametersData.o debug\AutomatedTestReport.o debug\moc_MainWindow.o debug\moc_MainPage.o debug\moc_CableTestBench.o debug\moc_VisualInspectionPage.o debug\moc_ConnectorSelectWidget.o debug\moc_CableTestPage.o debug\moc_ConnectorClickZoneWidget.o debug\moc_ONOFFStatusWidget.o debug\moc_ConnectorTestVisualizationWidget.o debug\moc_CableTestEngine.o debug\moc_OptionsPage.o debug\moc_IOModulesInterface.o debug\moc_AutomatedTestReport.o
 
 distclean: clean
 	-$(DEL_FILE) $(DESTDIR_TARGET)
@@ -145,9 +159,9 @@ mocclean: compiler_moc_header_clean compiler_moc_source_clean
 
 mocables: compiler_moc_header_make_all compiler_moc_source_make_all
 
-compiler_moc_header_make_all: debug/moc_MainWindow.cpp debug/moc_MainPage.cpp debug/moc_CableTestBench.cpp debug/moc_VisualInspectionPage.cpp debug/moc_ConnectorSelectWidget.cpp debug/moc_CableTestPage.cpp debug/moc_ConnectorClickZoneWidget.cpp debug/moc_ONOFFStatusWidget.cpp debug/moc_ConnectorTestVisualizationWidget.cpp debug/moc_OptionsPage.cpp
+compiler_moc_header_make_all: debug/moc_MainWindow.cpp debug/moc_MainPage.cpp debug/moc_CableTestBench.cpp debug/moc_VisualInspectionPage.cpp debug/moc_ConnectorSelectWidget.cpp debug/moc_CableTestPage.cpp debug/moc_ConnectorClickZoneWidget.cpp debug/moc_ONOFFStatusWidget.cpp debug/moc_ConnectorTestVisualizationWidget.cpp debug/moc_CableTestEngine.cpp debug/moc_OptionsPage.cpp debug/moc_IOModulesInterface.cpp debug/moc_AutomatedTestReport.cpp
 compiler_moc_header_clean:
-	-$(DEL_FILE) debug\moc_MainWindow.cpp debug\moc_MainPage.cpp debug\moc_CableTestBench.cpp debug\moc_VisualInspectionPage.cpp debug\moc_ConnectorSelectWidget.cpp debug\moc_CableTestPage.cpp debug\moc_ConnectorClickZoneWidget.cpp debug\moc_ONOFFStatusWidget.cpp debug\moc_ConnectorTestVisualizationWidget.cpp debug\moc_OptionsPage.cpp
+	-$(DEL_FILE) debug\moc_MainWindow.cpp debug\moc_MainPage.cpp debug\moc_CableTestBench.cpp debug\moc_VisualInspectionPage.cpp debug\moc_ConnectorSelectWidget.cpp debug\moc_CableTestPage.cpp debug\moc_ConnectorClickZoneWidget.cpp debug\moc_ONOFFStatusWidget.cpp debug\moc_ConnectorTestVisualizationWidget.cpp debug\moc_CableTestEngine.cpp debug\moc_OptionsPage.cpp debug\moc_IOModulesInterface.cpp debug\moc_AutomatedTestReport.cpp
 debug/moc_MainWindow.cpp: Sources/MainPage.h \
 		Sources/VisualInspectionPage.h \
 		Sources/VisualInspectionResult.h \
@@ -170,8 +184,14 @@ debug/moc_CableTestBench.cpp: Sources/MainWindow.h \
 		Sources/CableTestBenchDefs.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
 		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h \
 		Sources/CableTestBench.h
 	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\CableTestBench.h -o debug\moc_CableTestBench.cpp
 
@@ -198,9 +218,29 @@ debug/moc_ConnectorTestVisualizationWidget.cpp: Sources/Widgets/ONOFFStatusWidge
 		Sources/Widgets/ConnectorTestVisualizationWidget.h
 	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\Widgets\ConnectorTestVisualizationWidget.h -o debug\moc_ConnectorTestVisualizationWidget.cpp
 
+debug/moc_CableTestEngine.cpp: Sources/Cable.h \
+		Sources/CableTestBenchDefs.h \
+		Sources/InputConnector.h \
+		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
+		Sources/OutputConnector.h \
+		Sources/GlobalDefine.h \
+		Sources/TestReport.h \
+		Sources/VisualInspectionResult.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
+	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\CableTestEngine.h -o debug\moc_CableTestEngine.cpp
+
 debug/moc_OptionsPage.cpp: Sources/OptionsPage.h
 	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\OptionsPage.h -o debug\moc_OptionsPage.cpp
 
+debug/moc_IOModulesInterface.cpp: Sources/IOModulesInterface.h
+	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\IOModulesInterface.h -o debug\moc_IOModulesInterface.cpp
+
+debug/moc_AutomatedTestReport.cpp: Sources/AutomatedTestReport.h
+	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\AutomatedTestReport.h -o debug\moc_AutomatedTestReport.cpp
+
 compiler_rcc_make_all:
 compiler_rcc_clean:
 compiler_image_collection_make_all: qmake_image_collection.cpp
@@ -245,8 +285,14 @@ debug/MainWindow.o: Sources/MainWindow.cpp Sources/MainWindow.h \
 		Sources/OptionsPage.h \
 		Sources/CableTestBench.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\MainWindow.o Sources\MainWindow.cpp
 
 debug/main.o: Sources/main.cpp Sources/CableTestBench.h \
@@ -259,8 +305,14 @@ debug/main.o: Sources/main.cpp Sources/CableTestBench.h \
 		Sources/CableTestBenchDefs.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\main.o Sources\main.cpp
 
 debug/MainPage.o: Sources/MainPage.cpp Sources/MainPage.h \
@@ -277,8 +329,14 @@ debug/CableTestBench.o: Sources/CableTestBench.cpp Sources/CableTestBench.h \
 		Sources/CableTestBenchDefs.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\CableTestBench.o Sources\CableTestBench.cpp
 
 debug/VisualInspectionPage.o: Sources/VisualInspectionPage.cpp Sources/VisualInspectionPage.h \
@@ -292,8 +350,14 @@ debug/VisualInspectionPage.o: Sources/VisualInspectionPage.cpp Sources/VisualIns
 		Sources/CableTestBenchDefs.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\VisualInspectionPage.o Sources\VisualInspectionPage.cpp
 
 debug/ConnectorSelectWidget.o: Sources/Widgets/ConnectorSelectWidget.cpp Sources/Widgets/ConnectorSelectWidget.h \
@@ -311,8 +375,14 @@ debug/CableTestPage.o: Sources/CableTestPage.cpp Sources/CableTestPage.h \
 		Sources/GlobalDefine.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\CableTestPage.o Sources\CableTestPage.cpp
 
 debug/ConnectorClickZoneWidget.o: Sources/Widgets/ConnectorClickZoneWidget.cpp Sources/Widgets/ConnectorClickZoneWidget.h
@@ -327,12 +397,16 @@ debug/ConnectorTestVisualizationWidget.o: Sources/Widgets/ConnectorTestVisualiza
 
 debug/Connector.o: Sources/Connector.cpp Sources/Connector.h \
 		Sources/CableTestBenchDefs.h \
+		Sources/IOModulesInterface.h \
 		Sources/GlobalDefine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\Connector.o Sources\Connector.cpp
 
 debug/Cable.o: Sources/Cable.cpp Sources/Cable.h \
 		Sources/CableTestBenchDefs.h \
+		Sources/InputConnector.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
+		Sources/OutputConnector.h \
 		Sources/GlobalDefine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\Cable.o Sources\Cable.cpp
 
@@ -342,14 +416,29 @@ debug/VisualInspectionResult.o: Sources/VisualInspectionResult.cpp Sources/Visua
 
 debug/TestReport.o: Sources/TestReport.cpp Sources/TestReport.h \
 		Sources/GlobalDefine.h \
-		Sources/VisualInspectionResult.h
+		Sources/VisualInspectionResult.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\TestReport.o Sources\TestReport.cpp
 
 debug/CableTestEngine.o: Sources/CableTestEngine.cpp Sources/CableTestEngine.h \
 		Sources/Cable.h \
 		Sources/CableTestBenchDefs.h \
+		Sources/InputConnector.h \
 		Sources/Connector.h \
-		Sources/GlobalDefine.h
+		Sources/IOModulesInterface.h \
+		Sources/OutputConnector.h \
+		Sources/GlobalDefine.h \
+		Sources/TestReport.h \
+		Sources/VisualInspectionResult.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestBench.h \
+		Sources/MainWindow.h \
+		Sources/MainPage.h \
+		Sources/VisualInspectionPage.h \
+		Sources/CableTestPage.h \
+		Sources/OptionsPage.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\CableTestEngine.o Sources\CableTestEngine.cpp
 
 debug/OptionsPage.o: Sources/OptionsPage.cpp Sources/OptionsPage.h \
@@ -359,9 +448,31 @@ debug/OptionsPage.o: Sources/OptionsPage.cpp Sources/OptionsPage.h \
 debug/CableTestBenchDefs.o: Sources/CableTestBenchDefs.cpp Sources/CableTestBenchDefs.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\CableTestBenchDefs.o Sources\CableTestBenchDefs.cpp
 
-debug/IOModulesInterface.o: Sources/IOModulesInterface.cpp Sources/IOModulesInterface.h
+debug/IOModulesInterface.o: Sources/IOModulesInterface.cpp Sources/IOModulesInterface.h \
+		Sources/GlobalDefine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\IOModulesInterface.o Sources\IOModulesInterface.cpp
 
+debug/InputConnector.o: Sources/InputConnector.cpp Sources/InputConnector.h \
+		Sources/Connector.h \
+		Sources/CableTestBenchDefs.h \
+		Sources/IOModulesInterface.h
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\InputConnector.o Sources\InputConnector.cpp
+
+debug/OutputConnector.o: Sources/OutputConnector.cpp Sources/OutputConnector.h \
+		Sources/Connector.h \
+		Sources/CableTestBenchDefs.h \
+		Sources/IOModulesInterface.h \
+		Sources/GlobalDefine.h
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\OutputConnector.o Sources\OutputConnector.cpp
+
+debug/CableParametersData.o: Sources/CableParametersData.cpp Sources/CableParametersData.h \
+		Sources/GlobalDefine.h
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\CableParametersData.o Sources\CableParametersData.cpp
+
+debug/AutomatedTestReport.o: Sources/AutomatedTestReport.cpp Sources/AutomatedTestReport.h \
+		Sources/GlobalDefine.h
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\AutomatedTestReport.o Sources\AutomatedTestReport.cpp
+
 debug/moc_MainWindow.o: debug/moc_MainWindow.cpp 
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\moc_MainWindow.o debug\moc_MainWindow.cpp
 
@@ -389,9 +500,18 @@ debug/moc_ONOFFStatusWidget.o: debug/moc_ONOFFStatusWidget.cpp
 debug/moc_ConnectorTestVisualizationWidget.o: debug/moc_ConnectorTestVisualizationWidget.cpp 
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\moc_ConnectorTestVisualizationWidget.o debug\moc_ConnectorTestVisualizationWidget.cpp
 
+debug/moc_CableTestEngine.o: debug/moc_CableTestEngine.cpp 
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\moc_CableTestEngine.o debug\moc_CableTestEngine.cpp
+
 debug/moc_OptionsPage.o: debug/moc_OptionsPage.cpp 
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\moc_OptionsPage.o debug\moc_OptionsPage.cpp
 
+debug/moc_IOModulesInterface.o: debug/moc_IOModulesInterface.cpp 
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\moc_IOModulesInterface.o debug\moc_IOModulesInterface.cpp
+
+debug/moc_AutomatedTestReport.o: debug/moc_AutomatedTestReport.cpp 
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o debug\moc_AutomatedTestReport.o debug\moc_AutomatedTestReport.cpp
+
 ####### Install
 
 install:   FORCE

Makefile.Release

@@ -1,6 +1,6 @@
 #############################################################################
 # Makefile for building: CableTestBench
-# Generated by qmake (2.01a) (Qt 4.8.1) on: Fri May 3 13:12:37 2019
+# Generated by qmake (2.01a) (Qt 4.8.1) on: Wed May 8 14:10:10 2019
 # Project:  CableTestBench.pro
 # Template: app
 #############################################################################
@@ -58,7 +58,11 @@ SOURCES       = Sources\MainWindow.cpp \
 		Sources\CableTestEngine.cpp \
 		Sources\OptionsPage.cpp \
 		Sources\CableTestBenchDefs.cpp \
-		Sources\IOModulesInterface.cpp release\moc_MainWindow.cpp \
+		Sources\IOModulesInterface.cpp \
+		Sources\InputConnector.cpp \
+		Sources\OutputConnector.cpp \
+		Sources\CableParametersData.cpp \
+		Sources\AutomatedTestReport.cpp release\moc_MainWindow.cpp \
 		release\moc_MainPage.cpp \
 		release\moc_CableTestBench.cpp \
 		release\moc_VisualInspectionPage.cpp \
@@ -67,7 +71,10 @@ SOURCES       = Sources\MainWindow.cpp \
 		release\moc_ConnectorClickZoneWidget.cpp \
 		release\moc_ONOFFStatusWidget.cpp \
 		release\moc_ConnectorTestVisualizationWidget.cpp \
-		release\moc_OptionsPage.cpp
+		release\moc_CableTestEngine.cpp \
+		release\moc_OptionsPage.cpp \
+		release\moc_IOModulesInterface.cpp \
+		release\moc_AutomatedTestReport.cpp
 OBJECTS       = release/MainWindow.o \
 		release/main.o \
 		release/MainPage.o \
@@ -86,6 +93,10 @@ OBJECTS       = release/MainWindow.o \
 		release/OptionsPage.o \
 		release/CableTestBenchDefs.o \
 		release/IOModulesInterface.o \
+		release/InputConnector.o \
+		release/OutputConnector.o \
+		release/CableParametersData.o \
+		release/AutomatedTestReport.o \
 		release/moc_MainWindow.o \
 		release/moc_MainPage.o \
 		release/moc_CableTestBench.o \
@@ -95,7 +106,10 @@ OBJECTS       = release/MainWindow.o \
 		release/moc_ConnectorClickZoneWidget.o \
 		release/moc_ONOFFStatusWidget.o \
 		release/moc_ConnectorTestVisualizationWidget.o \
-		release/moc_OptionsPage.o
+		release/moc_CableTestEngine.o \
+		release/moc_OptionsPage.o \
+		release/moc_IOModulesInterface.o \
+		release/moc_AutomatedTestReport.o
 DIST          = 
 QMAKE_TARGET  = CableTestBench
 DESTDIR        = release\ #avoid trailing-slash linebreak
@@ -133,7 +147,7 @@ dist:
 	$(ZIP) CableTestBench.zip $(SOURCES) $(DIST) CableTestBench.pro ..\..\Qt\4.8.1\mkspecs\qconfig.pri ..\..\Qt\4.8.1\mkspecs\modules\qt_webkit_version.pri ..\..\Qt\4.8.1\mkspecs\features\qt_functions.prf ..\..\Qt\4.8.1\mkspecs\features\qt_config.prf ..\..\Qt\4.8.1\mkspecs\features\exclusive_builds.prf ..\..\Qt\4.8.1\mkspecs\features\default_pre.prf ..\..\Qt\4.8.1\mkspecs\features\win32\default_pre.prf ..\..\Qt\4.8.1\mkspecs\features\release.prf ..\..\Qt\4.8.1\mkspecs\features\debug_and_release.prf ..\..\Qt\4.8.1\mkspecs\features\default_post.prf ..\..\Qt\4.8.1\mkspecs\features\win32\default_post.prf ..\..\Qt\4.8.1\mkspecs\features\build_pass.prf ..\..\Qt\4.8.1\mkspecs\features\declarative_debug.prf ..\..\Qt\4.8.1\mkspecs\features\win32\rtti.prf ..\..\Qt\4.8.1\mkspecs\features\win32\exceptions.prf ..\..\Qt\4.8.1\mkspecs\features\win32\stl.prf ..\..\Qt\4.8.1\mkspecs\features\shared.prf ..\..\Qt\4.8.1\mkspecs\features\warn_on.prf ..\..\Qt\4.8.1\mkspecs\features\qt.prf ..\..\Qt\4.8.1\mkspecs\features\win32\thread.prf ..\..\Qt\4.8.1\mkspecs\features\moc.prf ..\..\Qt\4.8.1\mkspecs\features\win32\windows.prf ..\..\Qt\4.8.1\mkspecs\features\resources.prf ..\..\Qt\4.8.1\mkspecs\features\uic.prf ..\..\Qt\4.8.1\mkspecs\features\yacc.prf ..\..\Qt\4.8.1\mkspecs\features\lex.prf ..\..\Qt\4.8.1\mkspecs\features\include_source_dir.prf c:\Qt\4.8.1\lib\qtmain.prl  HEADERS RESOURCES IMAGES SOURCES OBJECTIVE_SOURCES FORMS YACCSOURCES YACCSOURCES LEXSOURCES 
 
 clean: compiler_clean 
-	-$(DEL_FILE) release\MainWindow.o release\main.o release\MainPage.o release\CableTestBench.o release\VisualInspectionPage.o release\ConnectorSelectWidget.o release\CableTestPage.o release\ConnectorClickZoneWidget.o release\ONOFFStatusWidget.o release\ConnectorTestVisualizationWidget.o release\Connector.o release\Cable.o release\VisualInspectionResult.o release\TestReport.o release\CableTestEngine.o release\OptionsPage.o release\CableTestBenchDefs.o release\IOModulesInterface.o release\moc_MainWindow.o release\moc_MainPage.o release\moc_CableTestBench.o release\moc_VisualInspectionPage.o release\moc_ConnectorSelectWidget.o release\moc_CableTestPage.o release\moc_ConnectorClickZoneWidget.o release\moc_ONOFFStatusWidget.o release\moc_ConnectorTestVisualizationWidget.o release\moc_OptionsPage.o
+	-$(DEL_FILE) release\MainWindow.o release\main.o release\MainPage.o release\CableTestBench.o release\VisualInspectionPage.o release\ConnectorSelectWidget.o release\CableTestPage.o release\ConnectorClickZoneWidget.o release\ONOFFStatusWidget.o release\ConnectorTestVisualizationWidget.o release\Connector.o release\Cable.o release\VisualInspectionResult.o release\TestReport.o release\CableTestEngine.o release\OptionsPage.o release\CableTestBenchDefs.o release\IOModulesInterface.o release\InputConnector.o release\OutputConnector.o release\CableParametersData.o release\AutomatedTestReport.o release\moc_MainWindow.o release\moc_MainPage.o release\moc_CableTestBench.o release\moc_VisualInspectionPage.o release\moc_ConnectorSelectWidget.o release\moc_CableTestPage.o release\moc_ConnectorClickZoneWidget.o release\moc_ONOFFStatusWidget.o release\moc_ConnectorTestVisualizationWidget.o release\moc_CableTestEngine.o release\moc_OptionsPage.o release\moc_IOModulesInterface.o release\moc_AutomatedTestReport.o
 
 distclean: clean
 	-$(DEL_FILE) $(DESTDIR_TARGET)
@@ -145,9 +159,9 @@ mocclean: compiler_moc_header_clean compiler_moc_source_clean
 
 mocables: compiler_moc_header_make_all compiler_moc_source_make_all
 
-compiler_moc_header_make_all: release/moc_MainWindow.cpp release/moc_MainPage.cpp release/moc_CableTestBench.cpp release/moc_VisualInspectionPage.cpp release/moc_ConnectorSelectWidget.cpp release/moc_CableTestPage.cpp release/moc_ConnectorClickZoneWidget.cpp release/moc_ONOFFStatusWidget.cpp release/moc_ConnectorTestVisualizationWidget.cpp release/moc_OptionsPage.cpp
+compiler_moc_header_make_all: release/moc_MainWindow.cpp release/moc_MainPage.cpp release/moc_CableTestBench.cpp release/moc_VisualInspectionPage.cpp release/moc_ConnectorSelectWidget.cpp release/moc_CableTestPage.cpp release/moc_ConnectorClickZoneWidget.cpp release/moc_ONOFFStatusWidget.cpp release/moc_ConnectorTestVisualizationWidget.cpp release/moc_CableTestEngine.cpp release/moc_OptionsPage.cpp release/moc_IOModulesInterface.cpp release/moc_AutomatedTestReport.cpp
 compiler_moc_header_clean:
-	-$(DEL_FILE) release\moc_MainWindow.cpp release\moc_MainPage.cpp release\moc_CableTestBench.cpp release\moc_VisualInspectionPage.cpp release\moc_ConnectorSelectWidget.cpp release\moc_CableTestPage.cpp release\moc_ConnectorClickZoneWidget.cpp release\moc_ONOFFStatusWidget.cpp release\moc_ConnectorTestVisualizationWidget.cpp release\moc_OptionsPage.cpp
+	-$(DEL_FILE) release\moc_MainWindow.cpp release\moc_MainPage.cpp release\moc_CableTestBench.cpp release\moc_VisualInspectionPage.cpp release\moc_ConnectorSelectWidget.cpp release\moc_CableTestPage.cpp release\moc_ConnectorClickZoneWidget.cpp release\moc_ONOFFStatusWidget.cpp release\moc_ConnectorTestVisualizationWidget.cpp release\moc_CableTestEngine.cpp release\moc_OptionsPage.cpp release\moc_IOModulesInterface.cpp release\moc_AutomatedTestReport.cpp
 release/moc_MainWindow.cpp: Sources/MainPage.h \
 		Sources/VisualInspectionPage.h \
 		Sources/VisualInspectionResult.h \
@@ -170,8 +184,14 @@ release/moc_CableTestBench.cpp: Sources/MainWindow.h \
 		Sources/CableTestBenchDefs.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
 		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h \
 		Sources/CableTestBench.h
 	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\CableTestBench.h -o release\moc_CableTestBench.cpp
 
@@ -198,9 +218,29 @@ release/moc_ConnectorTestVisualizationWidget.cpp: Sources/Widgets/ONOFFStatusWid
 		Sources/Widgets/ConnectorTestVisualizationWidget.h
 	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\Widgets\ConnectorTestVisualizationWidget.h -o release\moc_ConnectorTestVisualizationWidget.cpp
 
+release/moc_CableTestEngine.cpp: Sources/Cable.h \
+		Sources/CableTestBenchDefs.h \
+		Sources/InputConnector.h \
+		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
+		Sources/OutputConnector.h \
+		Sources/GlobalDefine.h \
+		Sources/TestReport.h \
+		Sources/VisualInspectionResult.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
+	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\CableTestEngine.h -o release\moc_CableTestEngine.cpp
+
 release/moc_OptionsPage.cpp: Sources/OptionsPage.h
 	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\OptionsPage.h -o release\moc_OptionsPage.cpp
 
+release/moc_IOModulesInterface.cpp: Sources/IOModulesInterface.h
+	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\IOModulesInterface.h -o release\moc_IOModulesInterface.cpp
+
+release/moc_AutomatedTestReport.cpp: Sources/AutomatedTestReport.h
+	C:\Qt\4.8.1\bin\moc.exe $(DEFINES) $(INCPATH) -D__GNUC__ -DWIN32 Sources\AutomatedTestReport.h -o release\moc_AutomatedTestReport.cpp
+
 compiler_rcc_make_all:
 compiler_rcc_clean:
 compiler_image_collection_make_all: qmake_image_collection.cpp
@@ -245,8 +285,14 @@ release/MainWindow.o: Sources/MainWindow.cpp Sources/MainWindow.h \
 		Sources/OptionsPage.h \
 		Sources/CableTestBench.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\MainWindow.o Sources\MainWindow.cpp
 
 release/main.o: Sources/main.cpp Sources/CableTestBench.h \
@@ -259,8 +305,14 @@ release/main.o: Sources/main.cpp Sources/CableTestBench.h \
 		Sources/CableTestBenchDefs.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\main.o Sources\main.cpp
 
 release/MainPage.o: Sources/MainPage.cpp Sources/MainPage.h \
@@ -277,8 +329,14 @@ release/CableTestBench.o: Sources/CableTestBench.cpp Sources/CableTestBench.h \
 		Sources/CableTestBenchDefs.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\CableTestBench.o Sources\CableTestBench.cpp
 
 release/VisualInspectionPage.o: Sources/VisualInspectionPage.cpp Sources/VisualInspectionPage.h \
@@ -292,8 +350,14 @@ release/VisualInspectionPage.o: Sources/VisualInspectionPage.cpp Sources/VisualI
 		Sources/CableTestBenchDefs.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\VisualInspectionPage.o Sources\VisualInspectionPage.cpp
 
 release/ConnectorSelectWidget.o: Sources/Widgets/ConnectorSelectWidget.cpp Sources/Widgets/ConnectorSelectWidget.h \
@@ -311,8 +375,14 @@ release/CableTestPage.o: Sources/CableTestPage.cpp Sources/CableTestPage.h \
 		Sources/GlobalDefine.h \
 		Sources/OptionsPage.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
 		Sources/Cable.h \
-		Sources/TestReport.h
+		Sources/InputConnector.h \
+		Sources/OutputConnector.h \
+		Sources/TestReport.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestEngine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\CableTestPage.o Sources\CableTestPage.cpp
 
 release/ConnectorClickZoneWidget.o: Sources/Widgets/ConnectorClickZoneWidget.cpp Sources/Widgets/ConnectorClickZoneWidget.h
@@ -327,12 +397,16 @@ release/ConnectorTestVisualizationWidget.o: Sources/Widgets/ConnectorTestVisuali
 
 release/Connector.o: Sources/Connector.cpp Sources/Connector.h \
 		Sources/CableTestBenchDefs.h \
+		Sources/IOModulesInterface.h \
 		Sources/GlobalDefine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\Connector.o Sources\Connector.cpp
 
 release/Cable.o: Sources/Cable.cpp Sources/Cable.h \
 		Sources/CableTestBenchDefs.h \
+		Sources/InputConnector.h \
 		Sources/Connector.h \
+		Sources/IOModulesInterface.h \
+		Sources/OutputConnector.h \
 		Sources/GlobalDefine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\Cable.o Sources\Cable.cpp
 
@@ -342,14 +416,29 @@ release/VisualInspectionResult.o: Sources/VisualInspectionResult.cpp Sources/Vis
 
 release/TestReport.o: Sources/TestReport.cpp Sources/TestReport.h \
 		Sources/GlobalDefine.h \
-		Sources/VisualInspectionResult.h
+		Sources/VisualInspectionResult.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\TestReport.o Sources\TestReport.cpp
 
 release/CableTestEngine.o: Sources/CableTestEngine.cpp Sources/CableTestEngine.h \
 		Sources/Cable.h \
 		Sources/CableTestBenchDefs.h \
+		Sources/InputConnector.h \
 		Sources/Connector.h \
-		Sources/GlobalDefine.h
+		Sources/IOModulesInterface.h \
+		Sources/OutputConnector.h \
+		Sources/GlobalDefine.h \
+		Sources/TestReport.h \
+		Sources/VisualInspectionResult.h \
+		Sources/CableParametersData.h \
+		Sources/TestBenchVersion.h \
+		Sources/CableTestBench.h \
+		Sources/MainWindow.h \
+		Sources/MainPage.h \
+		Sources/VisualInspectionPage.h \
+		Sources/CableTestPage.h \
+		Sources/OptionsPage.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\CableTestEngine.o Sources\CableTestEngine.cpp
 
 release/OptionsPage.o: Sources/OptionsPage.cpp Sources/OptionsPage.h \
@@ -359,9 +448,31 @@ release/OptionsPage.o: Sources/OptionsPage.cpp Sources/OptionsPage.h \
 release/CableTestBenchDefs.o: Sources/CableTestBenchDefs.cpp Sources/CableTestBenchDefs.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\CableTestBenchDefs.o Sources\CableTestBenchDefs.cpp
 
-release/IOModulesInterface.o: Sources/IOModulesInterface.cpp Sources/IOModulesInterface.h
+release/IOModulesInterface.o: Sources/IOModulesInterface.cpp Sources/IOModulesInterface.h \
+		Sources/GlobalDefine.h
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\IOModulesInterface.o Sources\IOModulesInterface.cpp
 
+release/InputConnector.o: Sources/InputConnector.cpp Sources/InputConnector.h \
+		Sources/Connector.h \
+		Sources/CableTestBenchDefs.h \
+		Sources/IOModulesInterface.h
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\InputConnector.o Sources\InputConnector.cpp
+
+release/OutputConnector.o: Sources/OutputConnector.cpp Sources/OutputConnector.h \
+		Sources/Connector.h \
+		Sources/CableTestBenchDefs.h \
+		Sources/IOModulesInterface.h \
+		Sources/GlobalDefine.h
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\OutputConnector.o Sources\OutputConnector.cpp
+
+release/CableParametersData.o: Sources/CableParametersData.cpp Sources/CableParametersData.h \
+		Sources/GlobalDefine.h
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\CableParametersData.o Sources\CableParametersData.cpp
+
+release/AutomatedTestReport.o: Sources/AutomatedTestReport.cpp Sources/AutomatedTestReport.h \
+		Sources/GlobalDefine.h
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\AutomatedTestReport.o Sources\AutomatedTestReport.cpp
+
 release/moc_MainWindow.o: release/moc_MainWindow.cpp 
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\moc_MainWindow.o release\moc_MainWindow.cpp
 
@@ -389,9 +500,18 @@ release/moc_ONOFFStatusWidget.o: release/moc_ONOFFStatusWidget.cpp
 release/moc_ConnectorTestVisualizationWidget.o: release/moc_ConnectorTestVisualizationWidget.cpp 
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\moc_ConnectorTestVisualizationWidget.o release\moc_ConnectorTestVisualizationWidget.cpp
 
+release/moc_CableTestEngine.o: release/moc_CableTestEngine.cpp 
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\moc_CableTestEngine.o release\moc_CableTestEngine.cpp
+
 release/moc_OptionsPage.o: release/moc_OptionsPage.cpp 
 	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\moc_OptionsPage.o release\moc_OptionsPage.cpp
 
+release/moc_IOModulesInterface.o: release/moc_IOModulesInterface.cpp 
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\moc_IOModulesInterface.o release\moc_IOModulesInterface.cpp
+
+release/moc_AutomatedTestReport.o: release/moc_AutomatedTestReport.cpp 
+	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o release\moc_AutomatedTestReport.o release\moc_AutomatedTestReport.cpp
+
 ####### Install
 
 install:   FORCE

Sources/AutomatedTestReport.cpp

@@ -0,0 +1,94 @@
+#include "AutomatedTestReport.h"
+#include "GlobalDefine.h"
+
+CAutomatedTestReport::CAutomatedTestReport(QObject *parent) :
+    QObject(parent)
+{
+}
+
+int CAutomatedTestReport::ClearAutomatedTestReport()
+{
+    mTestPinsResult.clear();
+    mPinCount = 0;
+    return RET_OK;
+}
+
+int CAutomatedTestReport::SetPinCount(int Pincount)
+{
+    mPinCount = Pincount;
+    mTestPinsResult.clear();
+    for(int i = 0; i < Pincount; i++)
+    {
+        mTestPinsResult.append(CPinTestResult(i+1));
+    }
+
+    return RET_OK;
+}
+
+int CAutomatedTestReport::SetPinResult(int PinNumber, bool ContinuityPassed, bool IsolationPassed)
+{
+    int ZeroBasedPinIndex = PinNumber - 1;
+    if(ZeroBasedPinIndex < 0 || ZeroBasedPinIndex >= mPinCount) //Try not to crash.
+    {
+        return RET_ERROR;
+    }
+
+    mTestPinsResult[ZeroBasedPinIndex].mIsolationTestPass = IsolationPassed;
+    mTestPinsResult[ZeroBasedPinIndex].mContinuityTestPass = ContinuityPassed;
+
+    return RET_OK;
+}
+
+
+int CAutomatedTestReport::SetPinContinuityResult(int PinNumber,bool ContinuityPassed)
+{
+    int ZeroBasedPinIndex = PinNumber - 1;
+    if(ZeroBasedPinIndex < 0 || ZeroBasedPinIndex >= mPinCount) //Try not to crash.
+    {
+        return RET_ERROR;
+    }
+
+    mTestPinsResult[ZeroBasedPinIndex].mContinuityTestPass = ContinuityPassed;
+
+    return RET_OK;
+}
+
+int CAutomatedTestReport::SetPinIsolationResult(int PinNumber, bool IsolationPassed)
+{
+    int ZeroBasedPinIndex = PinNumber - 1;
+    if(ZeroBasedPinIndex < 0 || ZeroBasedPinIndex >= mPinCount) //Try not to crash.
+    {
+        return RET_ERROR;
+    }
+
+    mTestPinsResult[ZeroBasedPinIndex].mIsolationTestPass = IsolationPassed;
+
+    return RET_OK;
+}
+
+int CAutomatedTestReport::SetPinSecondTestResult(int PinNumber, bool SecondTestPassed)
+{
+    int ZeroBasedPinIndex = PinNumber - 1;
+    if(ZeroBasedPinIndex < 0 || ZeroBasedPinIndex >= mPinCount) //Try not to crash.
+    {
+        return RET_ERROR;
+    }
+
+    mTestPinsResult[ZeroBasedPinIndex].mSecondTestPass = SecondTestPassed;
+
+    return RET_OK;
+}
+
+CPinTestResult::CPinTestResult(int PinNumber)
+{
+    mPinNumber = PinNumber;
+    mContinuityTestPass = PIN_TEST_RESULT_UNKNOWN;
+    mIsolationTestPass = PIN_TEST_RESULT_UNKNOWN;
+    mSecondTestPass = PIN_TEST_RESULT_UNKNOWN;
+    mShortedPinsList.clear();
+}
+
+CPinTestResult::~CPinTestResult()
+{
+    mShortedPinsList.clear();
+}

Sources/AutomatedTestReport.h

@@ -0,0 +1,55 @@
+#ifndef AUTOMATEDTESTREPORT_H
+#define AUTOMATEDTESTREPORT_H
+
+#include <QObject>
+#include <QList>
+
+class CPinTestResult;
+
+class CAutomatedTestReport : public QObject
+{
+    Q_OBJECT
+public:
+    explicit CAutomatedTestReport(QObject *parent = 0);
+
+    int ClearAutomatedTestReport();
+    int SetPinCount(int Pincount);
+
+    int SetPinResult(int PinNumber,bool ContinuityPassed, bool IsolationPassed);
+    int SetPinContinuityResult(int PinNumber,bool ContinuityPassed);
+    int SetPinIsolationResult(int PinNumber, bool IsolationPassed);
+    int SetPinSecondTestResult(int PinNumber, bool SecondTestPassed);
+
+private:
+    QList<CPinTestResult> mTestPinsResult;
+    int mPinCount;
+    
+signals:
+    
+public slots:
+    
+};
+
+class CPinTestResult
+{
+public:
+    enum ePinTestResultDef
+    {
+        PIN_TEST_FAILED,
+        PIN_TEST_SUCCESS,
+        PIN_TEST_RESULT_UNKNOWN
+    };
+
+    explicit CPinTestResult(int PinNumber);
+    ~CPinTestResult();
+
+    int mPinNumber;
+    int mContinuityTestPass;
+    int mIsolationTestPass;
+    int mSecondTestPass;
+
+    QList<int> mShortedPinsList;
+
+};
+
+#endif // AUTOMATEDTESTREPORT_H

Sources/Cable.cpp

@@ -1,14 +1,20 @@
 #include "Cable.h"
 
-CCable::CCable(CConnectorDefs::eConnectorType InputConnectorType)
+CCable::CCable(CConnectorDefs::eConnectorType InputConnectorType, CIOModulesInterface *IOInterface)
 {
-    mInputConnector.SetConnectorType(CConnectorDefs::UNKNOWN_CONNECTOR_TYPE);
-    mOutputConnector.SetConnectorType(CConnectorDefs::UNKNOWN_CONNECTOR_TYPE);
+
+    mInputConnector.SetIOInterface(IOInterface);
+    mOutputConnector.SetIOInterface(IOInterface);
+    DefineCableByInputConnector(InputConnectorType);
+//    mInputConnector.SetConnectorType(CConnectorDefs::UNKNOWN_CONNECTOR_TYPE);
+//    mOutputConnector.SetConnectorType(CConnectorDefs::UNKNOWN_CONNECTOR_TYPE);
     mCableDefined = false;
+    mIOInterfaceHandle = IOInterface;
 }
 
 int CCable::DefineCableByInputConnector(CConnectorDefs::eConnectorType InputConnectorType)
 {
+    mOutputPinsBuffer.clear();
     switch(InputConnectorType)
     {
         case CConnectorDefs::INPUT_6_PINS_CONNECTOR_TYPE:
@@ -54,6 +60,7 @@ int CCable::DefineCableByInputConnector(CConnectorDefs::eConnectorType InputConn
 
     }
 
+    mOutputPinsBuffer = QBitArray(mOutputConnector.GetPinCount());
     mCableDefined = true;
     return RET_OK;
 
@@ -64,12 +71,20 @@ bool CCable::IsCableDefined()
     return mCableDefined;
 }
 
-CConnector *CCable::GetInputConnector()
+CInputConnector *CCable::GetInputConnector()
 {
     return &mInputConnector;
 }
 
-CConnector *CCable::GetOutputConnector()
+COutputConnector *CCable::GetOutputConnector()
 {
     return &mOutputConnector;
 }
+
+int CCable::ClearAllOutputConnectorPins()
+{
+    mOutputPinsBuffer.fill(false);
+
+    return mOutputConnector.SetOutputPins(mOutputPinsBuffer);
+
+}

Sources/Cable.h

@@ -2,24 +2,32 @@
 #define CABLE_H
 
 #include "CableTestBenchDefs.h"
-#include "Connector.h"
+#include "InputConnector.h"
+#include "OutputConnector.h"
 #include "GlobalDefine.h"
+#include "IOModulesInterface.h"
 
 class CCable
 {
 public:
-    CCable(CConnectorDefs::eConnectorType InputConnectorType);
+    CCable(CConnectorDefs::eConnectorType InputConnectorType,CIOModulesInterface *IOInterface);
 
     int DefineCableByInputConnector(CConnectorDefs::eConnectorType InputConnectorType);
-    CConnector *GetInputConnector();
-    CConnector *GetOutputConnector();
+    CInputConnector *GetInputConnector();
+    COutputConnector *GetOutputConnector();
 
     bool IsCableDefined();
 
+    int ClearAllOutputConnectorPins();
+
+
 
 private:
-    CConnector mInputConnector, mOutputConnector;
+    CInputConnector mInputConnector;
+    COutputConnector mOutputConnector;
     bool mCableDefined;
+    CIOModulesInterface *mIOInterfaceHandle;
+    QBitArray mOutputPinsBuffer;
 
 };
 

Sources/CableParametersData.cpp

@@ -0,0 +1,37 @@
+#include "CableParametersData.h"
+#include "GlobalDefine.h"
+
+CCableParametersData::CCableParametersData()
+{
+    ResetData();
+}
+
+int CCableParametersData::ResetData()
+{
+    mStationName.clear();
+    mCableIdentification.clear();
+    mCableType.clear();
+    mTestOperatorName.clear();
+
+    mInputConnectorType.clear();
+    mOutputConnectorType.clear();
+
+    return RET_OK;
+}
+
+int CCableParametersData::SetCableParams(QString StationName, QString CableIdentification, QString CableType, QString OperatorName)
+{
+    mStationName = StationName;
+    mCableIdentification = CableIdentification;
+    mCableType = CableType;
+    mTestOperatorName = OperatorName;
+
+    return RET_OK;
+}
+
+int CCableParametersData::SetCableType(QString InputConnectortype, QString OutputConnectorType)
+{
+    mInputConnectorType = InputConnectortype;
+    mOutputConnectorType = OutputConnectorType;
+    return RET_OK;
+}

Sources/CableParametersData.h

@@ -0,0 +1,29 @@
+#ifndef CABLEPARAMETERSDATA_H
+#define CABLEPARAMETERSDATA_H
+
+#include <QString>
+#include <Connector.h>
+
+class CCableParametersData
+{
+public:
+    CCableParametersData();
+
+    int ResetData();
+
+    int SetCableParams(QString StationName, QString CableIdentification, QString CableType, QString OperatorName);
+    int SetCableType(QString InputConnectortype, QString OutputConnectorType);
+
+
+
+private:
+    QString mStationName;
+    QString mCableIdentification; //Cable name
+    QString mCableType;  //permanent or temporary
+    QString mTestOperatorName;
+
+    QString mInputConnectorType;
+    QString mOutputConnectorType;
+};
+
+#endif // CABLEPARAMETERSDATA_H

Sources/CableTestBench.cpp

@@ -1,9 +1,10 @@
 #include "CableTestBench.h"
 #include <QDateTime>
+#include "CableTestBenchDefs.h"
 
 CCableTestBench::CCableTestBench(QObject *parent) :
     QObject(parent),
-    mActualCable(CConnectorDefs::UNKNOWN_CONNECTOR_TYPE)
+    mActualCable(CConnectorDefs::UNKNOWN_CONNECTOR_TYPE,&mIOInterface)
 {
     w = new MainWindow(0,this);
 }
@@ -23,11 +24,20 @@ int CCableTestBench::Start()
     mVisualInspPageHandle = w->mVisualInspPage;
     mCableTestPageHandle = w->mCableTestPage;
 
+
+    mCableTestEngine.InitCableTestEngine(this);
+
     mIOInterface.OpenIOModules();
 
+    mCableTestPageHandle->mGuiRefreshTimer.start();
+
     return 1;
 }
 
+CCable * CCableTestBench::GetActualCable()
+{
+    return &mActualCable;
+}
 
 quint8 CCableTestBench::DecToBCDByte(const quint8 byte)
 {
@@ -73,6 +83,8 @@ CCable* CCableTestBench::SetSelectedConnector(CConnectorDefs::eConnectorType Con
         return 0;
     }
 
+    CheckIfReadyForTesting();
+
     return &mActualCable;
 }
 
@@ -90,5 +102,140 @@ int CCableTestBench::VisualInspectionQuitRequest()
 
     w->ShowCableTestPage();
 
+    CheckIfReadyForTesting();
+
+    return RET_OK;
+}
+
+int CCableTestBench::StartPauseAutomaticTestRequest()
+{
+    if(mCableTestEngine.GetTestEngineCurrentMode() == CCableTestEngine::CABLE_TEST_STBY_MODE)
+    {
+        mCableTestPageHandle->FillReportCableParametersData(mCableTestReport.GetReportCableParameters());
+        mCableTestReport.GetReportCableParameters()->SetCableType(CConnectorDefs::GetConnectorDescription(mActualCable.GetInputConnector()->GetConnectorType()),
+                                                                  CConnectorDefs::GetConnectorDescription(mActualCable.GetOutputConnector()->GetConnectorType()));
+        mCableTestReport.GetAutomatedTestReport()->SetPinCount(mActualCable.mOutputConnector.GetPinCount());
+
+        mCableTestEngine.StartAutomatedTest();
+        return RET_OK;
+    }
+    if(mCableTestEngine.GetTestEngineCurrentMode() == CCableTestEngine::CABLE_AUTO_TEST_RUNNING_MODE)
+    {
+        mCableTestEngine.PauseAutomatedTest();
+        return RET_OK;
+    }
+    if(mCableTestEngine.GetTestEngineCurrentMode() == CCableTestEngine::CABLE_AUTO_TEST_PAUSED_MODE)
+    {
+        mCableTestEngine.ResumeAutomatedTest();
+        return RET_OK;
+    }
+    else    //Button shouldn't be used in manual mode...
+    {
+        return RET_ERROR;
+    }
+
+    return RET_OK;
+}
+
+int CCableTestBench::StartStopManualTestRequest()
+{
+    if(mCableTestEngine.GetTestEngineCurrentMode() == CCableTestEngine::CABLE_TEST_STBY_MODE)
+    {
+        mCableTestEngine.StartManualTest();
+        return RET_OK;
+    }
+    if(mCableTestEngine.GetTestEngineCurrentMode() == CCableTestEngine::CABLE_TEST_MANUAL_MODE)
+    {
+        mCableTestEngine.StopManualTest();
+        return RET_OK;
+    }
+    else    //Button shouldn't be used in Automatic mode...
+    {
+        return RET_ERROR;
+    }
+
+
+}
+
+int CCableTestBench::NewCableRequest()
+{
+    mActualCable.DefineCableByInputConnector(CConnectorDefs::UNKNOWN_CONNECTOR_TYPE);
+    mVisualInspPageHandle->ResetForm();
+    mCableTestPageHandle->ResetCable();
+    mCableTestPageHandle->DisableStartTestBtn();
+    mCableTestReport.CreateNewTestReport();
+    return RET_OK;
+}
+
+int CCableTestBench::CheckIfReadyForTesting()
+{
+    bool VisualInspectionDone = false, ConnectorSelected = false, CableConfigured = true;
+
+    mVisualInspPageHandle->FillVisualInspectionResultReport(mCableTestReport.GetInspectionResult());
+    if(mCableTestReport.GetInspectionResult()->IsVisualInspectionResultComplete() == true)
+    {
+        VisualInspectionDone = true;
+    }
+    //todo, use the options flag to bypass visual inspection
+    VisualInspectionDone = true;
+
+    ConnectorSelected = mActualCable.IsCableDefined();
+
+    if(VisualInspectionDone && ConnectorSelected && CableConfigured)
+    {
+        mCableTestPageHandle->EnableStartTestBtn();
+    }
+    else
+    {
+        mCableTestPageHandle->DisableStartTestBtn();
+    }
+
+    return RET_OK;
+}
+
+int CCableTestBench::CableEngineModeChanged(CCableTestEngine::eCableTestEngineMode Mode)
+{
+    switch(Mode)
+    {
+        case CCableTestEngine::CABLE_TEST_STBY_MODE:
+        {
+            mCableTestPageHandle->CableTestEnded();
+            break;
+        }
+        case CCableTestEngine::CABLE_AUTO_TEST_RUNNING_MODE:
+        {
+            mCableTestPageHandle->CableAutomaticTestStarted();
+            break;
+        }
+        case CCableTestEngine::CABLE_AUTO_TEST_PAUSED_MODE:
+        {
+            mCableTestPageHandle->CableAutomaticTestPaused();
+            break;
+        }
+        case CCableTestEngine::CABLE_TEST_MANUAL_MODE:
+        {
+            mCableTestPageHandle->CableManualTestStarted();
+            break;
+        }
+    }
+
+    return RET_OK;
+}
+
+int CCableTestBench::ResetAutomaticTestRequest()
+{
+   return mCableTestEngine.StopAutomatedTest();
+
+}
+
+int CCableTestBench::ManualPinToggleRequest(int ConnectorPinNbr)
+{
+    return mCableTestEngine.ManualPinToggle(ConnectorPinNbr);
+}
+
+int CCableTestBench::RefreshConnectorsStateRequest()
+{
+    mCableTestPageHandle->SetInputConnectorState(mActualCable.GetInputConnector()->GetInputPinsStates());
+    mCableTestPageHandle->SetOutputConnectorState(mActualCable.GetOutputConnector()->GetOutputPinsStates());
     return RET_OK;
 }

Sources/CableTestBench.h

@@ -8,12 +8,14 @@
 #include "Cable.h"
 #include "TestReport.h"
 #include "IOModulesInterface.h"
+#include "CableTestEngine.h"
 
 
 class CMainPage;
 class CVisualInspectionPage;
 class CCableTestPage;
 
+
 class CCableTestBench : public QObject
 {
     Q_OBJECT
@@ -28,21 +30,33 @@ public:
     CVisualInspectionPage *mVisualInspPageHandle;
     CCableTestPage *mCableTestPageHandle;
     CCable mActualCable;
+    CCableTestEngine mCableTestEngine;
 
     CIOModulesInterface mIOInterface;
 
     int ExecVisualInspectionRequest();
     int VisualInspectionQuitRequest();
+    int StartPauseAutomaticTestRequest();
+    int NewCableRequest();
+    int ResetAutomaticTestRequest();
+    int StartStopManualTestRequest();
+    int ManualPinToggleRequest(int ConnectorPinNbr);
+    int RefreshConnectorsStateRequest();
 
-    CCable *SetSelectedConnector(CConnectorDefs::eConnectorType ConType);
 
+    CCable *SetSelectedConnector(CConnectorDefs::eConnectorType ConType);
     CCable *GetActualCable();
 
+    int CableEngineModeChanged(CCableTestEngine::eCableTestEngineMode Mode);
+
+
+
 
    private:
 
     quint16 DecToBCDWord(const quint16 word);
     quint8 DecToBCDByte(const quint8 byte);
+    int CheckIfReadyForTesting();
 
     CTestReport mCableTestReport;
 

Sources/CableTestBenchDefs.cpp

@@ -1,23 +1,37 @@
 #include "CableTestBenchDefs.h"
 
-const int CConnectorDefs::ConnIOMapping[CConnectorDefs::NB_CONNECTOR_TYPE][2] = {
+const int CConnectorDefs::ConnIOMapping[CConnectorDefs::NB_CONNECTOR_TYPE][2] = {           //Connectors pins mapping (zero based index)
                                                                                 {0,0},      //Unknown
-                                                                                {97,102},   //in 6 pins
-                                                                                {91,104},     //in 14 pins
-                                                                                {73,96},      //in 24 pins
-                                                                                {1,72},      //in 72 pins
-                                                                                {1,90},      //in 90 pins
-                                                                                {1,108},     //in 108 pins
-                                                                                {1,108},     //in 120 pins
-                                                                                {97,102},    //out 6 pins
-                                                                                {91,104},     //out 14 pins
-                                                                                {73,96},      //out 24 pins
-                                                                                {1,72},      //out 72 pins
-                                                                                {1,108},     //out 108 pins
+                                                                                {96,101},   //in 6 pins
+                                                                                {90,103},     //in 14 pins
+                                                                                {72,95},      //in 24 pins
+                                                                                {0,71},      //in 72 pins
+                                                                                {0,89},      //in 90 pins
+                                                                                {0,107},     //in 108 pins
+                                                                                {0,107},     //in 120 pins
+                                                                                {96,101},    //out 6 pins
+                                                                                {90,103},     //out 14 pins
+                                                                                {72,95},      //out 24 pins
+                                                                                {0,71},      //out 72 pins
+                                                                                {0,107},     //out 108 pins
                                                                                 };
 
 const int CConnectorDefs::ConnPinCount[NB_CONNECTOR_TYPE] = {0, 6, 14, 24, 72, 90, 108, 120, 6, 14, 24, 72, 108};
 
+const char* CConnectorDefs::ConnectorDescription[NB_CONNECTOR_TYPE] = {"Connecteur inconnu ou invalide",
+                                                                       "Connecteur circulaire 6 contacts",
+                                                                       "Connecteur circulair 14 contacts",
+                                                                       "Connecteur Amphenol rectangulaire 24 contacts",
+                                                                       "Connecteur Amphenol rectangulaire 72 contacts",
+                                                                       "Connecteur Souriau rectangulaire 90 contacts",
+                                                                       "Connecteur Amphenol rectangulaire 108 contacts",
+                                                                       "Connecteur Souriau rectangulaire 120 contacts",
+                                                                       "Connecteur circulaire 6 contacts",
+                                                                       "Connecteur circulair 14 contacts",
+                                                                       "Connecteur Amphenol rectangulaire 24 contacts",
+                                                                       "Connecteur Amphenol rectangulaire 72 contacts",
+                                                                       "Connecteur Amphenol rectangulaire 108 contacts"};
+
 
 
 const int CConnectorDefs::GetPinCount(eConnectorType type)
@@ -59,3 +73,13 @@ const int * CConnectorDefs::GetConnectorIOMapping(eConnectorType type)
 
     return ConnIOMapping[type];
 }
+
+const char * CConnectorDefs::GetConnectorDescription(eConnectorType type)
+{
+    if(type < 0 || type >= NB_CONNECTOR_TYPE)
+    {
+        return ConnectorDescription[UNKNOWN_CONNECTOR_TYPE];
+    }
+
+    return ConnectorDescription[type];
+}

Sources/CableTestBenchDefs.h

@@ -29,12 +29,15 @@ public:
 
     static const int ConnIOMapping[NB_CONNECTOR_TYPE][2];
     static const int ConnPinCount[NB_CONNECTOR_TYPE];
+    static const char* ConnectorDescription[NB_CONNECTOR_TYPE];
 
     static const int GetPinCount(eConnectorType type);
     static const int GetConnectorIOMappingStart(eConnectorType type);
     static const int GetConnectorIOMappingEnd(eConnectorType type);
     static const int* GetConnectorIOMapping(eConnectorType type);
 
+    static const char* GetConnectorDescription(eConnectorType type);
+
 
 };
 

Sources/CableTestEngine.cpp

@@ -1,5 +1,354 @@
 #include "CableTestEngine.h"
+#include "CableTestBench.h"
 
 CCableTestEngine::CCableTestEngine()
 {
+
+    mCableTestSMState = CABLE_TEST_INIT_STATE;
+}
+
+CCableTestEngine::~CCableTestEngine()
+{
+    delete mCableTestSMTimer;
+}
+
+int CCableTestEngine::InitCableTestEngine(CCableTestBench *ProgramHandle)
+{
+    mProgramHandle = ProgramHandle;
+    mTestCable = ProgramHandle->GetActualCable();
+    mTestInputConnectorHandle = mTestCable->GetInputConnector();
+    mTestOutputConnectorHandle = mTestCable->GetOutputConnector();
+
+
+    mCableTestSMTimer = new QTimer();
+    mCableTestSMTimer->setSingleShot(false);
+    mCableTestSMTimer->setInterval(TEST_ENGINE_SM_TIMEOUT);
+    mCableTestSMTimer->stop();
+    connect(mCableTestSMTimer,SIGNAL(timeout()),this,SLOT(SMTimerExpired()));
+
+    //TODO: Get this from the options page...
+    mPinHoldTime = 500;    //ms
+
+    CableTestEngineStateMachine(CABLE_TEST_TICK_SM_EVENT);
+
+    return RET_OK;
+}
+
+void CCableTestEngine::CableTestEngineStateMachine(int Event)
+{
+    switch(mCableTestSMState)
+    {
+        case CABLE_TEST_INIT_STATE:
+        {
+            mCableTestSMState = CABLE_TEST_STBY_STATE;
+            mCableTestSMTimer->start();
+            break;
+        }//case CABLE_TEST_INIT_STATE
+
+        case CABLE_TEST_STBY_STATE:
+        {
+            switch(Event)
+            {
+                case CABLE_TEST_START_AUTO_TEST_SM_EVENT:
+                {
+                    mCableTestSMState = CABLE_TEST_START_AUTOMATED_TEST_STATE;
+                    mProgramHandle->CableEngineModeChanged(GetTestEngineCurrentMode());
+                    break;
+                }
+                case CABLE_TEST_START_MANUAL_TEST_SM_EVENT:
+                {
+                    mCableTestSMState = CABLE_TEST_START_MANUAL_TEST_STATE;
+                    break;
+                }
+                default:
+                {
+                    break;
+                }
+            }
+
+            break;
+        }// case CABLE_TEST_STBY_STATE
+
+        case CABLE_TEST_START_AUTOMATED_TEST_STATE:
+        {
+            mTestOutputConnectorHandle->ClearAllPins();
+            mCableTestSMState = CABLE_AUTO_TEST_SELF_TEST_STATE;
+
+            mCableTestGPTimer.start();
+
+            qDebug("Test automatique démarré...");
+            break;
+        }//case CABLE_TEST_START_AUTOMATED_TEST_STATE
+
+        case CABLE_AUTO_TEST_SELF_TEST_STATE:
+        {
+            if(mCableTestGPTimer.elapsed() < mPinHoldTime)
+            {
+                break;
+            }
+            else
+            {
+                if(mTestOutputConnectorHandle->GetOutputPinsStates().count(true) != 0)
+                {
+                    //TODO: Manage this failure mode
+                    qDebug("Échec de l'auto test des modules de sortie");
+                }
+                else
+                {
+                    mCurPinUnderTest = 1;
+                    mTestOutputConnectorHandle->SetSinglePin(mCurPinUnderTest);
+                    //OK
+                }
+
+                mCableTestGPTimer.start();
+                mCableTestSMState = CABLE_AUTO_TEST_PINS_STATE;
+            }
+            break;
+        }//case CABLE_AUTO_TEST_SELF_TEST_STATE
+
+        case CABLE_AUTO_TEST_PINS_STATE:
+        {
+            switch(Event)
+            {
+                case CABLE_TEST_TICK_SM_EVENT:
+                {
+                    if(mCableTestGPTimer.elapsed() < mPinHoldTime)
+                    {
+                        break;
+                    }
+                    else
+                    {
+                        QBitArray Out = mTestOutputConnectorHandle->GetOutputPinsStates();
+                        QBitArray In = mTestInputConnectorHandle->GetInputPinsStates();
+
+                        //Analyse the inputs buffer...
+
+                        if(In.count(true) != 1)    //check if only 1 input pin is active
+                        {
+                            //TODO: Manage this failure mode
+
+                            if(In.count(true) == 0) //Check if no input pin is active
+                            {
+                                qDebug("Échec du test du contact %d : aucune pin activée en entrée",mCurPinUnderTest);
+                            }
+                            else    //If here, many input pins are active...
+                            {
+                                qDebug("Échec du test du contact %d : plusieurs (%d) pins activées en entrée",mCurPinUnderTest,In.count(true));
+                            }
+                        }
+                        else if(In.at(mCurPinUnderTest-1) == false)
+                        {
+                            //TODO: Manage this failure mode
+                            //the output pin isn't set...
+                            qDebug("Échec du test du contact %d: mauvais contact activé en entrée",mCurPinUnderTest);
+                        }
+                        else
+                        {
+                            //Pin test passed.  Test the next one
+                            qDebug("Succès du test du contact %d", mCurPinUnderTest);
+                        }
+                        mCurPinUnderTest++;
+                        if(mCurPinUnderTest > (mTestOutputConnectorHandle->GetPinCount()))
+                        {
+                            //Test finished.
+                            mCableTestSMState = CABLE_AUTO_TEST_END_TEST_STATE;
+                        }
+                        else
+                        {
+                            mTestOutputConnectorHandle->SetSinglePin(mCurPinUnderTest);
+                            mCableTestGPTimer.start();
+                        }
+
+                    }
+                    break;
+                }
+                case CABLE_TEST_PAUSE_AUTO_TEST_SM_EVENT:
+                {
+                    mCableTestSMState = CABLE_AUTO_TEST_PAUSE_STATE;
+                    mProgramHandle->CableEngineModeChanged(GetTestEngineCurrentMode());
+                    qDebug("Test mis en pause...");
+                    break;
+                }
+                case CABLE_TEST_CANCEL_AUTO_TEST_SM_EVENT:
+                {
+                    mCableTestSMState = CABLE_AUTO_TEST_END_TEST_STATE;
+                    qDebug("Test annulé...");
+                    break;
+                }
+                default:
+                {
+                    break;
+                }
+
+            }
+
+            break;
+        }//case CABLE_AUTO_TEST_PINS_STATE:
+
+        case CABLE_AUTO_TEST_PAUSE_STATE:
+        {
+            switch(Event)
+            {
+                case CABLE_TEST_RESUME_AUTO_TEST_SM_EVENT:
+                {
+                    mCableTestSMState = CABLE_AUTO_TEST_PINS_STATE;
+                    mProgramHandle->CableEngineModeChanged(GetTestEngineCurrentMode());
+                    qDebug("Test redémarré...");
+                    break;
+                }
+                case CABLE_TEST_CANCEL_AUTO_TEST_SM_EVENT:
+                {
+                    mCableTestSMState = CABLE_AUTO_TEST_END_TEST_STATE;
+                    qDebug("Test annulé...");
+                    break;
+                }
+                default:
+                {
+                    break;
+                }
+            }
+
+            break;
+        }//case CABLE_AUTO_TEST_PAUSE_STATE
+
+        case CABLE_AUTO_TEST_END_TEST_STATE:
+        {
+            qDebug("Test automatique terminé...");
+            mTestOutputConnectorHandle->ClearAllPins();
+            mCableTestSMState = CABLE_TEST_STBY_STATE;
+            mProgramHandle->CableEngineModeChanged(GetTestEngineCurrentMode());
+            break;
+        }//case CABLE_TEST_END_TEST_STATE
+
+        case CABLE_TEST_START_MANUAL_TEST_STATE:
+        {
+            mTestOutputConnectorHandle->ClearAllPins();
+            qDebug("Entrée en mode test manuel");
+            mCableTestSMState = CABLE_MANUAL_TEST_PINS_STATE;
+            mProgramHandle->CableEngineModeChanged(GetTestEngineCurrentMode());
+            break;
+        }//CABLE_TEST_START_MANUAL_TEST_STATE
+
+        case CABLE_MANUAL_TEST_PINS_STATE:
+        {
+            switch(Event)
+            {
+                case CABLE_TEST_EXIT_MANUAL_TEST_SM_EVENT:
+                {
+                    mCableTestSMState = CABLE_MANUAL_TEST_END_TEST_STATE;
+                    break;
+                }
+                default:
+                {
+                    break;
+                }
+            }
+
+            break;
+        }//CABLE_MANUAL_TEST_PINS_STATE
+
+        case CABLE_MANUAL_TEST_END_TEST_STATE:
+        {
+            mTestOutputConnectorHandle->ClearAllPins();
+            mCableTestSMState = CABLE_TEST_STBY_STATE;
+            mProgramHandle->CableEngineModeChanged(GetTestEngineCurrentMode());
+            break;
+        }
+    }
+}
+
+void CCableTestEngine::SMTimerExpired()
+{
+    //TODO: manage the end of the test
+    CableTestEngineStateMachine(CABLE_TEST_TICK_SM_EVENT);
+
+}
+
+int CCableTestEngine::StartAutomatedTest()
+{
+    if(mCableTestSMState != CABLE_TEST_STBY_STATE)
+    {
+        return RET_ERROR;
+    }
+
+    CableTestEngineStateMachine(CABLE_TEST_START_AUTO_TEST_SM_EVENT);
+
+    return RET_OK;
+}
+
+int CCableTestEngine::PauseAutomatedTest()
+{
+    CableTestEngineStateMachine(CABLE_TEST_PAUSE_AUTO_TEST_SM_EVENT);
+
+    return RET_OK;
+}
+
+int CCableTestEngine::ResumeAutomatedTest()
+{
+    CableTestEngineStateMachine(CABLE_TEST_RESUME_AUTO_TEST_SM_EVENT);
+
+    return RET_OK;
+}
+
+int CCableTestEngine::StopAutomatedTest()
+{
+    CableTestEngineStateMachine(CABLE_TEST_CANCEL_AUTO_TEST_SM_EVENT);
+    return RET_OK;
+}
+
+int CCableTestEngine::StartManualTest()
+{
+    CableTestEngineStateMachine(CABLE_TEST_START_MANUAL_TEST_SM_EVENT);
+    return RET_OK;
+}
+
+int CCableTestEngine::StopManualTest()
+{
+    CableTestEngineStateMachine(CABLE_TEST_EXIT_MANUAL_TEST_SM_EVENT);
+    return RET_OK;
+}
+
+CCableTestEngine::eCableTestEngineMode CCableTestEngine::GetTestEngineCurrentMode()
+{
+    switch(mCableTestSMState)
+    {
+        case CABLE_TEST_INIT_STATE:
+        case CABLE_TEST_STBY_STATE:
+        case CABLE_AUTO_TEST_END_TEST_STATE:
+        case CABLE_MANUAL_TEST_END_TEST_STATE:
+        {
+            return CABLE_TEST_STBY_MODE;
+            break;
+        }
+        case CABLE_TEST_START_AUTOMATED_TEST_STATE:
+        case CABLE_AUTO_TEST_SELF_TEST_STATE:
+        case CABLE_AUTO_TEST_PINS_STATE:
+        {
+            return CABLE_AUTO_TEST_RUNNING_MODE;
+            break;
+        }
+        case CABLE_AUTO_TEST_PAUSE_STATE:
+        {
+            return CABLE_AUTO_TEST_PAUSED_MODE;
+            break;
+        }
+        case CABLE_TEST_START_MANUAL_TEST_STATE:
+        case CABLE_MANUAL_TEST_PINS_STATE:
+        default:
+        {
+            return CABLE_TEST_MANUAL_MODE;
+            break;
+        }
+
+    }
+}
+
+int CCableTestEngine::ManualPinToggle(int ConnectorPinNbr)
+{
+    if(GetTestEngineCurrentMode() == CABLE_TEST_MANUAL_MODE)
+    {
+        return mTestOutputConnectorHandle->TogglePin(ConnectorPinNbr);
+    }
+
+    return RET_ERROR;
 }

Sources/CableTestEngine.h

@@ -1,16 +1,92 @@
 #ifndef CABLETESTENGINE_H
 #define CABLETESTENGINE_H
 #include "Cable.h"
+#include <QTimer>
+#include "InputConnector.h"
+#include "OutputConnector.h"
+#include <QElapsedTimer>
+#include "TestReport.h"
 
-class CCableTestEngine
+class CCableTestBench;
+
+#define TEST_ENGINE_SM_STANDBY_TIMEOUT 300 //ms
+#define TEST_ENGINE_SM_TIMEOUT 100 //ms
+
+class CCableTestEngine : public QObject
 {
+    Q_OBJECT
 public:
+
+    enum eCableTestEngineMode
+    {
+        CABLE_TEST_STBY_MODE,
+        CABLE_AUTO_TEST_RUNNING_MODE,
+        CABLE_AUTO_TEST_PAUSED_MODE,
+        CABLE_TEST_MANUAL_MODE
+    };
+
     CCableTestEngine();
+    ~CCableTestEngine();
+    int InitCableTestEngine(CCableTestBench *ProgramHandle);
+
+    int StartAutomatedTest();
+    int PauseAutomatedTest();
+    int ResumeAutomatedTest();
+    int StopAutomatedTest();
+    int StartManualTest();
+    int StopManualTest();
+    int ManualPinToggle(int ConnectorPinNbr);
+
+    bool IsAutomaticTestRunning();
+    eCableTestEngineMode GetTestEngineCurrentMode();
+
 
 private:
 
+    enum eCableTestState
+    {
+        CABLE_TEST_INIT_STATE,
+        CABLE_TEST_STBY_STATE,
+        CABLE_TEST_START_AUTOMATED_TEST_STATE,
+        CABLE_AUTO_TEST_SELF_TEST_STATE,
+        CABLE_AUTO_TEST_PINS_STATE,
+        CABLE_AUTO_TEST_PAUSE_STATE,
+        CABLE_AUTO_TEST_END_TEST_STATE,
+        CABLE_TEST_START_MANUAL_TEST_STATE,
+        CABLE_MANUAL_TEST_PINS_STATE,
+        CABLE_MANUAL_TEST_END_TEST_STATE
+    };
+
+    enum eCableTestSMEvents
+    {
+        CABLE_TEST_START_AUTO_TEST_SM_EVENT,
+        CABLE_TEST_TICK_SM_EVENT,
+        CABLE_TEST_PAUSE_AUTO_TEST_SM_EVENT,
+        CABLE_TEST_RESUME_AUTO_TEST_SM_EVENT,
+        CABLE_TEST_CANCEL_AUTO_TEST_SM_EVENT,
+        CABLE_TEST_START_MANUAL_TEST_SM_EVENT,
+        CABLE_TEST_EXIT_MANUAL_TEST_SM_EVENT
+
+    };
+
     CCable *mTestCable;
+    int mCableTestSMState;
+    CCableTestBench *mProgramHandle;
+    CInputConnector *mTestInputConnectorHandle;
+    COutputConnector *mTestOutputConnectorHandle;
+    int mCurPinUnderTest;
+    int mPinHoldTime;
+
+    QTimer *mCableTestSMTimer;
+    QElapsedTimer mCableTestGPTimer;
+
+    void CableTestEngineStateMachine(int Event);
+
+
+
 
+public slots:
+    void SMTimerExpired();
 
 
 };

Sources/CableTestPage.cpp

@@ -2,6 +2,7 @@
 #include "ui_CableTestPage.h"
 #include "CableTestBench.h"
 #include <QTextCodec>
+#include "CableParametersData.h"
 
 CCableTestPage::CCableTestPage(QWidget *parent) :
     QWidget(parent),
@@ -22,6 +23,30 @@ CCableTestPage::CCableTestPage(QWidget *parent) :
     ui->mInputTestVisualisationWidget->SetConnectorPinCount(0);
     ui->mOutputTestVisualisationWidget->SetConnectorPinCount(0);
     ui->mVisualInspStepChkBx->setCheckable(false);
+
+
+    mGuiRefreshTimer.setSingleShot(false);
+    mGuiRefreshTimer.setInterval(200);
+
+
+    connect(ui->mStartTestBtn,SIGNAL(clicked()),this,SLOT(StartTestBtnClicked()));
+    connect(ui->mReinitTestBtn,SIGNAL(clicked()),this,SLOT(ResetTestBtnClicked()));
+    connect(ui->mNewCableBtn,SIGNAL(clicked()),this,SLOT(NewCableBtnClicked()));
+    connect(ui->mStartManualTestBtn,SIGNAL(clicked()),this,SLOT(StartManualTestBtnClicked()));
+    connect(ui->mOutputTestVisualisationWidget,SIGNAL(PinClicked(int)),this,SLOT(OutputConnectorPinClicked(int)));
+    connect(&mGuiRefreshTimer,SIGNAL(timeout()),this,SLOT(GuiRefreshTimerExpired()));
+
+
+
+    mDefaultCableName = "CABLE_XX_NO_AA_BB.c";
+    mDefaultInspectorName = "JFMartel";
+
+    ui->mStartTestBtn->setEnabled(false);
+    ui->mStartManualTestBtn->setEnabled(false);
+    ui->mOutputTestVisualisationWidget->DisablePinClicks();
+
+
+    ResetCable();
 }
 
 CCableTestPage::~CCableTestPage()
@@ -65,3 +90,157 @@ void CCableTestPage::ConnectorSelectionChanged(CConnectorDefs::eConnectorType Co
         ui->mOutputTestVisualisationWidget->SetConnectorPinCount(Cable->GetOutputConnector()->GetPinCount());
     }
 }
+
+void CCableTestPage::StartTestBtnClicked()
+{
+    mProgramHandle->StartPauseAutomaticTestRequest();
+}
+
+void CCableTestPage::StartManualTestBtnClicked()
+{
+    mProgramHandle->StartStopManualTestRequest();
+}
+
+void CCableTestPage::ResetTestBtnClicked()
+{
+    mProgramHandle->ResetAutomaticTestRequest();
+}
+
+void CCableTestPage::NewCableBtnClicked()
+{
+     mProgramHandle->NewCableRequest();
+}
+
+int CCableTestPage::ResetCable()
+{
+    //reset pins state visualization area
+    ui->mInputTestVisualisationWidget->ClearConnectorsLists();
+    ui->mOutputTestVisualisationWidget->ClearConnectorsLists();
+
+    //Reset cable config zone
+    ui->mIdentCableEditBox->setText(mDefaultCableName);
+    ui->mNomTesteurEditBox->setText(mDefaultInspectorName);
+
+    //Reset Inspection Visuelle result (main program will clear the form)
+    SetVisualInspectionDone(false);
+
+    //Clear connector selection zone
+    ui->mConnectorSelectWidget->ClearAllConnectorsSelections();
+
+    return RET_OK;
+
+}
+
+int CCableTestPage::EnableStartTestBtn()
+{
+    ui->mStartTestBtn->setEnabled(true);
+    ui->mStartManualTestBtn->setEnabled(true);
+    return RET_OK;
+}
+
+int CCableTestPage::DisableStartTestBtn()
+{
+    ui->mStartTestBtn->setEnabled(false);
+    ui->mStartManualTestBtn->setEnabled(false);
+    return RET_OK;
+}
+
+int CCableTestPage::CableAutomaticTestStarted()
+{
+    ui->mStartManualTestBtn->setEnabled(false);
+    DisableGuiForTest();
+    ui->mStartTestBtn->setText("Pauser Test");
+    return RET_OK;
+}
+
+int CCableTestPage::CableAutomaticTestPaused()
+{
+    ui->mStartTestBtn->setText("Reprendre Test");
+    return RET_OK;
+}
+
+int CCableTestPage::CableTestEnded()
+{
+    EnableGuiAfterTest();
+    ui->mOutputTestVisualisationWidget->DisablePinClicks();
+    ui->mStartManualTestBtn->setEnabled(true);
+    ui->mStartTestBtn->setEnabled(true);
+    ui->mStartTestBtn->setText("Démarrer Test");
+    ui->mStartManualTestBtn->setText("Démarrer");
+    ui->mReinitTestBtn->setEnabled(true);
+    return RET_OK;
+}
+
+int CCableTestPage::CableManualTestStarted()
+{
+    ui->mStartTestBtn->setEnabled(false);
+    ui->mOutputTestVisualisationWidget->EnablePinClicks();
+    DisableGuiForTest();
+    ui->mStartManualTestBtn->setText("Terminer");
+    ui->mReinitTestBtn->setEnabled(false);
+    return RET_OK;
+}
+
+int CCableTestPage::DisableGuiForTest()
+{
+    ui->mNewCableBtn->setEnabled(false);
+    ui->mConnectorSelectWidget->setEnabled(false);
+    ui->mIdentCableEditBox->setEnabled(false);
+    ui->mExecInspVisuelleBtn->setEnabled(false);
+    ui->mNomTesteurEditBox->setEnabled(false);
+    ui->mTypeCableCombo->setEnabled(false);
+    ui->mStationNameCombo->setEnabled(false);
+    return RET_OK;
+}
+
+int CCableTestPage::EnableGuiAfterTest()
+{
+    ui->mNewCableBtn->setEnabled(true);
+    ui->mConnectorSelectWidget->setEnabled(true);
+    ui->mIdentCableEditBox->setEnabled(true);
+    ui->mExecInspVisuelleBtn->setEnabled(true);
+    ui->mNomTesteurEditBox->setEnabled(true);
+    ui->mTypeCableCombo->setEnabled(true);
+    ui->mStationNameCombo->setEnabled(true);
+    return RET_OK;
+}
+
+void CCableTestPage::OutputConnectorPinClicked(int PinNbr)
+{
+    mProgramHandle->ManualPinToggleRequest(PinNbr);
+}
+
+void CCableTestPage::GuiRefreshTimerExpired()
+{
+    mProgramHandle->RefreshConnectorsStateRequest();
+}
+
+int CCableTestPage::SetOutputConnectorState(QBitArray PinStates)
+{
+    return ui->mOutputTestVisualisationWidget->SetConnectorPinStates(PinStates);
+}
+
+int CCableTestPage::SetInputConnectorState(QBitArray PinStates)
+{
+    return ui->mInputTestVisualisationWidget->SetConnectorPinStates(PinStates);
+}
+
+void CCableTestPage::showEvent(QShowEvent *event)
+{
+
+    qDebug("Refresh timer started");
+    mGuiRefreshTimer.start();
+
+}
+
+void CCableTestPage::hideEvent(QHideEvent *event)
+{
+    qDebug("Refresh timer stopped");
+    mGuiRefreshTimer.stop();
+}
+
+int CCableTestPage::FillReportCableParametersData(CCableParametersData *ReportPtr)
+{
+    ReportPtr->SetCableParams(ui->mStationNameCombo->currentText(),ui->mIdentCableEditBox->text(),ui->mTypeCableCombo->currentText(),ui->mNomTesteurEditBox->text());
+    return RET_OK;
+}

Sources/CableTestPage.h

@@ -3,8 +3,13 @@
 
 #include <QWidget>
 #include "CableTestBenchDefs.h"
+#include <QBitArray>
+#include <QTimer>
+
 
 class CCableTestBench;
+class CCableParametersData;
+
 
 namespace Ui {
 class CCableTestPage;
@@ -19,19 +24,48 @@ public:
     ~CCableTestPage();
 
     CCableTestBench *mProgramHandle;
+    QTimer mGuiRefreshTimer;
+    void showEvent(QShowEvent *event);
+    void hideEvent(QHideEvent *event);
 
     int SetVisualInspectionDone(bool Done = true);
+    int ResetCable();
+    int EnableStartTestBtn();
+    int DisableStartTestBtn();
+    int CableAutomaticTestStarted();
+    int CableAutomaticTestPaused();
+    int CableTestEnded();
+    int CableManualTestStarted();
+
+    int SetInputConnectorState(QBitArray PinStates);
+    int SetOutputConnectorState(QBitArray PinStates);
+
+    int FillReportCableParametersData(CCableParametersData* ReportPtr);
+
 
 
-    
 private:
     Ui::CCableTestPage *ui;
 
     QPixmap mInspectionDonePixmap, mInspectionNotDonePixmap;
 
+    QString mDefaultCableName, mDefaultInspectorName;
+
+
+    int DisableGuiForTest();
+    int EnableGuiAfterTest();
+
+
+
 public slots:
     void InspVisuelleBtnClicked();
     void ConnectorSelectionChanged(CConnectorDefs::eConnectorType ConType);
+    void StartTestBtnClicked();
+    void ResetTestBtnClicked();
+    void NewCableBtnClicked();
+    void StartManualTestBtnClicked();
+    void OutputConnectorPinClicked(int PinNbr);
+    void GuiRefreshTimerExpired();
 };
 
 #endif // CABLETESTPAGE_H

Sources/CableTestPage.ui

@@ -251,7 +251,7 @@
     <rect>
      <x>10</x>
      <y>410</y>
-     <width>471</width>
+     <width>461</width>
      <height>351</height>
     </rect>
    </property>
@@ -275,9 +275,9 @@
   <widget class="CConnectorTestVisualizationWidget" name="mOutputTestVisualisationWidget" native="true">
    <property name="geometry">
     <rect>
-     <x>510</x>
+     <x>500</x>
      <y>410</y>
-     <width>441</width>
+     <width>461</width>
      <height>351</height>
     </rect>
    </property>
@@ -288,7 +288,7 @@
   <widget class="Line" name="line_2">
    <property name="geometry">
     <rect>
-     <x>490</x>
+     <x>480</x>
      <y>390</y>
      <width>20</width>
      <height>371</height>
@@ -352,7 +352,7 @@
     <rect>
      <x>50</x>
      <y>220</y>
-     <width>471</width>
+     <width>491</width>
      <height>131</height>
     </rect>
    </property>
@@ -362,32 +362,6 @@
    <property name="frameShadow">
     <enum>QFrame::Raised</enum>
    </property>
-   <widget class="QPushButton" name="mStartTestBtn">
-    <property name="geometry">
-     <rect>
-      <x>260</x>
-      <y>20</y>
-      <width>91</width>
-      <height>23</height>
-     </rect>
-    </property>
-    <property name="text">
-     <string>Démarrer test</string>
-    </property>
-   </widget>
-   <widget class="QPushButton" name="mReinitTestBtn">
-    <property name="geometry">
-     <rect>
-      <x>260</x>
-      <y>70</y>
-      <width>91</width>
-      <height>23</height>
-     </rect>
-    </property>
-    <property name="text">
-     <string>Réinitialiser test</string>
-    </property>
-   </widget>
    <widget class="QCheckBox" name="mCableIdentStepChkBx">
     <property name="geometry">
      <rect>
@@ -439,6 +413,71 @@
      <bool>false</bool>
     </property>
    </widget>
+   <widget class="QGroupBox" name="groupBox">
+    <property name="geometry">
+     <rect>
+      <x>230</x>
+      <y>10</y>
+      <width>121</width>
+      <height>91</height>
+     </rect>
+    </property>
+    <property name="title">
+     <string>Test Automatique</string>
+    </property>
+    <widget class="QPushButton" name="mStartTestBtn">
+     <property name="geometry">
+      <rect>
+       <x>20</x>
+       <y>20</y>
+       <width>91</width>
+       <height>23</height>
+      </rect>
+     </property>
+     <property name="text">
+      <string>Démarrer test</string>
+     </property>
+    </widget>
+    <widget class="QPushButton" name="mReinitTestBtn">
+     <property name="geometry">
+      <rect>
+       <x>20</x>
+       <y>50</y>
+       <width>91</width>
+       <height>23</height>
+      </rect>
+     </property>
+     <property name="text">
+      <string>Réinitialiser test</string>
+     </property>
+    </widget>
+   </widget>
+   <widget class="QGroupBox" name="groupBox_2">
+    <property name="geometry">
+     <rect>
+      <x>370</x>
+      <y>10</y>
+      <width>111</width>
+      <height>80</height>
+     </rect>
+    </property>
+    <property name="title">
+     <string>Test Manuel</string>
+    </property>
+    <widget class="QPushButton" name="mStartManualTestBtn">
+     <property name="geometry">
+      <rect>
+       <x>20</x>
+       <y>30</y>
+       <width>75</width>
+       <height>23</height>
+      </rect>
+     </property>
+     <property name="text">
+      <string>Exécuter</string>
+     </property>
+    </widget>
+   </widget>
   </widget>
   <widget class="QLabel" name="mInspVisuelleLabel_2">
    <property name="geometry">

Sources/Connector.cpp

@@ -5,6 +5,13 @@ CConnector::CConnector()
 {
     mPinCount = 0;
     mIOModuleRangeBegin = mIOModuleRangeEnd = 0;
+    mIOInterfaceHandle = 0;
+}
+
+int CConnector::SetIOInterface(CIOModulesInterface *IFHandle)
+{
+    mIOInterfaceHandle = IFHandle;
+    return RET_OK;
 }
 
 int CConnector::GetPinCount()
@@ -31,3 +38,8 @@ bool CConnector::IsConnectorDefined()
 
     return true;
 }
+
+CConnectorDefs::eConnectorType CConnector::GetConnectorType()
+{
+    return mConnectorType;
+}

Sources/Connector.h

@@ -2,6 +2,8 @@
 #define CONNECTOR_H
 
 #include "CableTestBenchDefs.h"
+#include <QBitArray>
+#include "IOModulesInterface.h"
 
 
 class CConnector
@@ -10,15 +12,21 @@ public:
     CConnector();
 
     int GetPinCount();
-    int SetConnectorType(CConnectorDefs::eConnectorType type);
+    virtual int SetConnectorType(CConnectorDefs::eConnectorType type);
     bool IsConnectorDefined();
+    int SetIOInterface(CIOModulesInterface *IFHandle);
+    CConnectorDefs::eConnectorType GetConnectorType();
 
-private:
-    int mPinCount;
+
+
+protected:
+    unsigned int mPinCount;
     CConnectorDefs::eConnectorType mConnectorType;
 
     int mIOModuleRangeBegin, mIOModuleRangeEnd;
 
+    CIOModulesInterface *mIOInterfaceHandle;
+
 
 
 };

Sources/IOModulesInterface.cpp

@@ -1,17 +1,31 @@
 #include "IOModulesInterface.h"
-
 #include "GlobalDefine.h"
 #include <QDebug>
 
+
 CIOModulesInterface::CIOModulesInterface()
 {
+//    mIOModulesQueryTimer = new QTimer();
+//    connect(mIOModulesQueryTimer,SIGNAL(timeout()),this,SLOT(IOModulesQueryTimerExpired()));
+
+//    mIOModulesQueryTimer->setInterval(IO_MODULES_REFRESH_INTERVAL);
+//    mIOModulesQueryTimer->setSingleShot(true);
+
+
+
+
+}
+
+CIOModulesInterface::~CIOModulesInterface()
+{
+    //delete mIOModulesQueryTimer;
 }
 
 
 int CIOModulesInterface::OpenIOModules()
 {
 
-    int ret = SM_Open(&hndl,"192.168.0.52");
+    int ret = SM_Open(&hndl,(char*)"192.168.0.52");
     if(ret < 0)
     {
         qDebug("Impossible d'ouvrir le module d'I/O, erreur %d",ret);
@@ -20,12 +34,49 @@ int CIOModulesInterface::OpenIOModules()
 
     qDebug("Module d'I/O ouvert avec succès");
 
+    DeviceConfig config;
+    SM_SelectDevice(hndl,INPUTS_MODULE_1_SLAVE_ID);
+    SM_GetDeviceConfig(hndl,&config);
+    qDebug("Module inputs 1: Address %d, Modèle %d",INPUTS_MODULE_1_SLAVE_ID, config.model);
+
+    SM_SelectDevice(hndl,INPUTS_MODULE_2_SLAVE_ID);
+    SM_GetDeviceConfig(hndl,&config);
+    qDebug("Module inputs 1: Address %d, Modèle %d",INPUTS_MODULE_2_SLAVE_ID, config.model);
+
+    SM_SelectDevice(hndl,INPUTS_MODULE_3_SLAVE_ID);
+    SM_GetDeviceConfig(hndl,&config);
+    qDebug("Module inputs 1: Address %d, Modèle %d",INPUTS_MODULE_3_SLAVE_ID, config.model);
+
+    SM_SelectDevice(hndl,INPUTS_MODULE_4_SLAVE_ID);
+    SM_GetDeviceConfig(hndl,&config);
+    qDebug("Module inputs 1: Address %d, Modèle %d",INPUTS_MODULE_4_SLAVE_ID, config.model);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_1_SLAVE_ID);
+    SM_GetDeviceConfig(hndl,&config);
+    qDebug("Module inputs 1: Address %d, Modèle %d",OUTPUTS_MODULE_1_SLAVE_ID, config.model);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_2_SLAVE_ID);
+    SM_GetDeviceConfig(hndl,&config);
+     qDebug("Module inputs 1: Address %d, Modèle %d",OUTPUTS_MODULE_2_SLAVE_ID, config.model);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_3_SLAVE_ID);
+    SM_GetDeviceConfig(hndl,&config);
+     qDebug("Module inputs 1: Address %d, Modèle %d",OUTPUTS_MODULE_3_SLAVE_ID, config.model);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_4_SLAVE_ID);
+    SM_GetDeviceConfig(hndl,&config);
+    qDebug("Module inputs 1: Address %d, Modèle %d",OUTPUTS_MODULE_4_SLAVE_ID, config.model);
+
+    ResetOutputs();
+
     return RET_OK;
 }
 
 int CIOModulesInterface::CloseIOModules()
 {
+ //   mIOModulesQueryTimer->stop();
     int ret = SM_Close(&hndl);
+
     if(ret < 0)
     {
         qDebug("Impossible de fermer le module d'I/O, erreur %d",ret);
@@ -33,5 +84,157 @@ int CIOModulesInterface::CloseIOModules()
     }
 
     qDebug("Module d'I/O fermé avec succès");
+
+
+
+
+    return RET_OK;
+}
+
+void CIOModulesInterface::IOModulesQueryTimerExpired()
+{
+    DoAllIOTransactions();
+ //   mIOModulesQueryTimer->start();
+    qDebug("timerout");
+}
+
+int CIOModulesInterface::ReadInputModules()
+{
+    unsigned char TempBuf[4];
+
+    SM_SelectDevice(hndl,INPUTS_MODULE_1_SLAVE_ID);
+    SM_ReadDigitalInputs(hndl,0,32,&TempBuf[0]);
+    memcpy(&mInputsBuffer[0],&TempBuf[0],4);
+
+    SM_SelectDevice(hndl,INPUTS_MODULE_2_SLAVE_ID);
+    SM_ReadDigitalInputs(hndl,0,32,&TempBuf[0]);
+    memcpy(&mInputsBuffer[4],&TempBuf[0],4);
+
+    SM_SelectDevice(hndl,INPUTS_MODULE_3_SLAVE_ID);
+    SM_ReadDigitalInputs(hndl,0,32,&TempBuf[0]);
+    memcpy(&mInputsBuffer[8],&TempBuf[0],4);
+
+    SM_SelectDevice(hndl,INPUTS_MODULE_4_SLAVE_ID);
+    SM_ReadDigitalInputs(hndl,0,32,&TempBuf[0]);
+    memcpy(&mInputsBuffer[12],&TempBuf[0],4);
+
+    return RET_OK;
+}
+
+int CIOModulesInterface::WriteOutputModules()
+{
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_1_SLAVE_ID);
+    SM_WriteDigitalOutputs(hndl,0,32,&mOutputsBuffer[0]);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_2_SLAVE_ID);
+    SM_WriteDigitalOutputs(hndl,0,32,&mOutputsBuffer[4]);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_3_SLAVE_ID);
+    SM_WriteDigitalOutputs(hndl,0,32,&mOutputsBuffer[8]);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_4_SLAVE_ID);
+    SM_WriteDigitalOutputs(hndl,0,32,&mOutputsBuffer[12]);
+
+    return RET_OK;
+}
+
+int CIOModulesInterface::ReadOutputStates()
+{
+    unsigned char TempBuf[4];
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_1_SLAVE_ID);
+    SM_ReadDigitalOutputs(hndl,0,32,&TempBuf[0]);
+    memcpy(&mOutputsStatebuffer[0],&TempBuf[0],4);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_2_SLAVE_ID);
+    SM_ReadDigitalOutputs(hndl,0,32,&TempBuf[0]);
+    memcpy(&mOutputsStatebuffer[4],&TempBuf[0],4);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_3_SLAVE_ID);
+    SM_ReadDigitalOutputs(hndl,0,32,&TempBuf[0]);
+    memcpy(&mOutputsStatebuffer[8],&TempBuf[0],4);
+
+    SM_SelectDevice(hndl,OUTPUTS_MODULE_4_SLAVE_ID);
+    SM_ReadDigitalOutputs(hndl,0,32,&TempBuf[0]);
+    memcpy(&mOutputsStatebuffer[12],&TempBuf[0],4);
+
+    return RET_OK;
+}
+
+int CIOModulesInterface::DoAllIOTransactions()
+{
+    ReadInputModules();
+    WriteOutputModules();
+    ReadOutputStates();
+    return RET_OK;
+}
+
+int CIOModulesInterface::ResetOutputs()
+{
+    memset(mOutputsBuffer,0x00,16);
+    return WriteOutputModules();
+}
+
+int CIOModulesInterface::SetOutputs(QBitArray Outputs)
+{
+    if(Outputs.size() != IO_COUNT)
+    {
+        return RET_ERROR;
+    }
+
+    int IO = 0;
+    unsigned char mask = 1;
+    for(int byte = 0; byte < 16; byte++)
+    {
+        mOutputsBuffer[byte] = 0;
+        mask = 1;
+        for(int bit = 0; bit < 8; bit++)
+        {
+            if(Outputs.at(IO))
+            {
+                mOutputsBuffer[byte] |= mask;
+            }
+            mask <<= 1;
+            IO++;
+        }
+    }
+
+    WriteOutputModules();
+
     return RET_OK;
 }
+
+QBitArray CIOModulesInterface::GetInputStates()
+{
+    ReadInputModules();
+    return CharBufferToBitArray(mInputsBuffer, 16);
+}
+
+QBitArray CIOModulesInterface::GetOutputStates()
+{
+    ReadOutputStates();
+    return CharBufferToBitArray(mOutputsStatebuffer, 16);
+}
+
+QBitArray CIOModulesInterface::CharBufferToBitArray(unsigned char *buf, int size_in_bytes)
+{
+    int Size = size_in_bytes*8;
+    QBitArray Result(Size);
+
+    int IO = 0;
+    unsigned char mask = 1;
+    for(int byte = 0; byte < size_in_bytes; byte++)
+    {
+        mask = 1;
+        for(int bit = 0; bit < 8; bit++)
+        {
+            if((buf[byte] & mask) != 0)
+            {
+                Result.setBit(IO);
+            }
+            mask <<= 1;
+            IO++;
+        }
+    }
+    return Result;
+}

Sources/IOModulesInterface.h

@@ -1,18 +1,61 @@
 #ifndef IOMODULESINTERFACE_H
 #define IOMODULESINTERFACE_H
 #include "SeaMAX.h"
+#include <QTimer>
+#include <QObject>
+#include <QBitArray>
 
+#define IO_MODULES_REFRESH_INTERVAL 300     //ms
+#define IO_COUNT 128    //4 modules of 32 bits
 
-class CIOModulesInterface
+class CIOModulesInterface : public QObject
 {
+    Q_OBJECT
 public:
+
+    enum eModulesSlaveIDDefs
+    {
+        INPUTS_MODULE_1_SLAVE_ID = 1,
+        INPUTS_MODULE_2_SLAVE_ID = 2,
+        INPUTS_MODULE_3_SLAVE_ID = 3,
+        INPUTS_MODULE_4_SLAVE_ID = 4,
+        OUTPUTS_MODULE_1_SLAVE_ID = 5,
+        OUTPUTS_MODULE_2_SLAVE_ID = 6,
+        OUTPUTS_MODULE_3_SLAVE_ID = 7,
+        OUTPUTS_MODULE_4_SLAVE_ID = 8
+
+    };
+
+
     CIOModulesInterface();
+    ~CIOModulesInterface();
 
     int OpenIOModules();
     int CloseIOModules();
 
+    int SetOutputs(QBitArray Outputs);
+    QBitArray GetInputStates();
+    QBitArray GetOutputStates();
+    int ResetOutputs();
+
 private:
     SM_HANDLE hndl;
+ //   QTimer *mIOModulesQueryTimer;
+    unsigned char mInputsBuffer[16];
+    unsigned char mOutputsBuffer[16];
+    unsigned char mOutputsStatebuffer[16];
+
+    int ReadInputModules();
+    int WriteOutputModules();
+    int ReadOutputStates();
+
+
+    int DoAllIOTransactions();
+
+    QBitArray CharBufferToBitArray(unsigned char *buf, int size_in_bytes);
+
+public slots:
+    void IOModulesQueryTimerExpired();
 };
 
 #endif // IOMODULESINTERFACE_H

Sources/InputConnector.cpp

@@ -0,0 +1,29 @@
+#include "InputConnector.h"
+
+CInputConnector::CInputConnector()
+{
+}
+
+QBitArray CInputConnector::GetInputPinsStates()
+{
+
+    if(!IsConnectorDefined())
+        return QBitArray();
+
+    QBitArray IOStates = mIOInterfaceHandle->GetInputStates();//inputs are active low, need to invert!!!
+    QBitArray PinsStates(mPinCount);
+
+    if(mIOModuleRangeEnd > IOStates.size()) //try not to crash!
+    {
+        qDebug("Logic error in CInputConnector::GetInputPinsStates(); mIOModuleRangeEnd greater than IO count");
+        return QBitArray();
+    }
+
+
+    int ConnectorPin = 0;
+    for(int IoPin = mIOModuleRangeBegin; IoPin <= mIOModuleRangeEnd; IoPin++)
+    {
+        PinsStates[ConnectorPin++] = IOStates[IoPin];
+    }
+    return PinsStates;
+}

Sources/InputConnector.h

@@ -0,0 +1,15 @@
+#ifndef INPUTCONNECTOR_H
+#define INPUTCONNECTOR_H
+#include "Connector.h"
+#include <QBitArray>
+
+class CInputConnector : public CConnector
+{
+public:
+    CInputConnector();
+
+    QBitArray GetInputPinsStates();
+
+};
+
+#endif // INPUTCONNECTOR_H

Sources/OptionsPage.ui

@@ -215,6 +215,19 @@
     <string>Appliquer &amp;&amp; Sauvegarder</string>
    </property>
   </widget>
+  <widget class="QCheckBox" name="mIgnoreVisualInspChkBx">
+   <property name="geometry">
+    <rect>
+     <x>500</x>
+     <y>200</y>
+     <width>221</width>
+     <height>17</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>Ignorer l'inspection visuelle</string>
+   </property>
+  </widget>
  </widget>
  <resources/>
  <connections/>

Sources/OutputConnector.cpp

@@ -0,0 +1,147 @@
+#include "OutputConnector.h"
+#include "GlobalDefine.h"
+
+COutputConnector::COutputConnector()
+{
+}
+
+
+int COutputConnector::SetOutputPins(QBitArray PinsStates)
+{
+    if(mIOModuleRangeEnd >= IO_COUNT)
+    {
+        qDebug("Logic error in COutputConnector::SetOutputPins; mIOModuleRangeEnd greater than IO count");
+        return RET_ERROR;
+     }
+    if(IsConnectorDefined() == false)
+    {
+        return RET_ERROR;
+    }
+
+    QBitArray OutputBuf(IO_COUNT);
+
+    int PinIndex = 0;
+    for(int IoPin = mIOModuleRangeBegin; IoPin <= mIOModuleRangeEnd; IoPin++)
+    {
+        OutputBuf[IoPin] = PinsStates[PinIndex++];
+    }
+
+    mIOInterfaceHandle->SetOutputs(OutputBuf);
+
+    return RET_OK;
+}
+
+
+QBitArray COutputConnector::GetOutputPinsStates()
+{
+    if(IsConnectorDefined() == false)
+    {
+        return QBitArray();
+    }
+
+    QBitArray IOStates = mIOInterfaceHandle->GetOutputStates();
+    QBitArray PinsStates(mPinCount);
+
+    if(mIOModuleRangeEnd > IOStates.size()) //try not to crash!
+    {
+        qDebug("Logic error in CInputConnector::GetInputPinsStates(); mIOModuleRangeEnd greater than IO count");
+        return QBitArray();
+    }
+
+    int ConnectorPin = 0;
+    for(int IoPin = mIOModuleRangeBegin; IoPin <= mIOModuleRangeEnd; IoPin++)
+    {
+        PinsStates[ConnectorPin++] = IOStates[IoPin];
+    }
+
+    return PinsStates;
+}
+
+int COutputConnector::SetConnectorType(CConnectorDefs::eConnectorType type)
+{
+    CConnector::SetConnectorType(type);
+
+    mOutputsPinsStateBuffer.clear();
+    mOutputsPinsStateBuffer = QBitArray(mPinCount);
+
+    ClearAllPins();
+    return RET_OK;
+}
+
+//! !!!! WARNING, PinIndex IS ZERO-BASED INDEX !!! //
+int COutputConnector::SetSinglePin(unsigned int PinNumber)
+{
+    if(IsConnectorDefined() == false)
+    {
+        return RET_ERROR;
+    }
+
+    int ZeroBasedPinIndex = PinNumber-1;
+
+    if(ZeroBasedPinIndex >= (int)mPinCount || ZeroBasedPinIndex < 0)
+    {
+        return RET_ERROR;
+    }
+
+    QBitArray PinsStates(mPinCount);
+    PinsStates.setBit(ZeroBasedPinIndex);
+
+    SetOutputPins(PinsStates);
+
+    return RET_OK;
+
+}
+
+//! !!!! WARNING, PinIndex IS ZERO-BASED INDEX !!! //
+int COutputConnector::GetSinglePinState(unsigned int PinNumber)
+{
+    if(IsConnectorDefined() == false)
+    {
+        return RET_ERROR;
+    }
+
+    int ZeroBasedPinIndex = PinNumber-1;
+
+    if(ZeroBasedPinIndex > (int)mPinCount || ZeroBasedPinIndex < 0)
+    {
+        return -1;
+    }
+
+    QBitArray CurStates = GetOutputPinsStates();
+
+    return CurStates.at(ZeroBasedPinIndex);
+}
+
+int COutputConnector::TogglePin(unsigned int PinNumber)
+{
+    if(IsConnectorDefined() == false)
+    {
+        return RET_ERROR;
+    }
+
+    int ZeroBasedPinIndex = PinNumber-1;
+
+    if(ZeroBasedPinIndex > (int)mPinCount || ZeroBasedPinIndex < 0)
+    {
+        return RET_ERROR;
+    }
+
+    QBitArray CurStates = GetOutputPinsStates();
+
+    CurStates.toggleBit(ZeroBasedPinIndex);
+    SetOutputPins(CurStates);
+
+    return RET_OK;
+
+}
+
+int COutputConnector::ClearAllPins()
+{
+    if(IsConnectorDefined() == false)
+    {
+        return RET_ERROR;
+    }
+
+    mIOInterfaceHandle->ResetOutputs();
+    return RET_OK;
+}

Sources/OutputConnector.h

@@ -0,0 +1,29 @@
+#ifndef OUTPUTCONNECTOR_H
+#define OUTPUTCONNECTOR_H
+
+#include "Connector.h"
+#include <QBitArray>
+
+class COutputConnector : public CConnector
+{
+public:
+    COutputConnector();
+
+    QBitArray GetOutputPinsStates();
+
+
+    int SetSinglePin(unsigned int PinNumber);
+    int GetSinglePinState(unsigned int PinNumber);
+    int TogglePin(unsigned int PinNumber);
+    int SetOutputPins(QBitArray PinsStates);
+    int ClearAllPins();
+
+    virtual int SetConnectorType(CConnectorDefs::eConnectorType type);
+
+private:
+    QBitArray mOutputsPinsStateBuffer;
+
+
+};
+
+#endif // OUTPUTCONNECTOR_H

Sources/TestBenchVersion.h

@@ -0,0 +1,15 @@
+#ifndef TESTBENCHVERSION_H
+#define TESTBENCHVERSION_H
+
+
+#define TEST_BENCH_VERSION "V0.10_ING_DEV"
+
+//LOG DES CHANGEMENTS
+
+
+
+//Version 0.10_ING_DEV
+//-Version de développement, pré-production
+
+#endif // TESTBENCHVERSION_H
+

Sources/TestReport.cpp

@@ -2,9 +2,25 @@
 
 CTestReport::CTestReport()
 {
+    mSoftwareVersion = QString(TEST_BENCH_VERSION);
+    CreateNewTestReport();
 }
 
 CVisualInspectionResult * CTestReport::GetInspectionResult()
 {
     return &mVisualInspectionResultReport;
 }
+
+CCableParametersData *CTestReport::GetReportCableParameters()
+{
+    return &mCableParameters;
+}
+
+int CTestReport::CreateNewTestReport()
+{
+    mVisualInspectionResultReport.ClearResults();
+    mCableParameters.ResetData();
+    mAutomatedTestReport.ClearAutomatedTestReport();
+
+    return RET_OK;
+}

Sources/TestReport.h

@@ -3,6 +3,9 @@
 
 #include "GlobalDefine.h"
 #include "VisualInspectionResult.h"
+#include "CableParametersData.h"
+#include "TestBenchVersion.h"
+#include "AutomatedTestReport.h"
 
 class CTestReport
 {
@@ -10,9 +13,16 @@ public:
     CTestReport();
 
     CVisualInspectionResult* GetInspectionResult();
+    CCableParametersData *GetReportCableParameters();
+    CAutomatedTestReport *GetAutomatedTestReport();
+
+    int CreateNewTestReport();
 
 private:
     CVisualInspectionResult mVisualInspectionResultReport;
+    CCableParametersData mCableParameters;
+    CAutomatedTestReport mAutomatedTestReport;
+    QString mSoftwareVersion;
 };
 
 #endif // TESTREPORT_H

Sources/VisualInspectionPage.ui

@@ -16,9 +16,9 @@
   <widget class="QLabel" name="label">
    <property name="geometry">
     <rect>
-     <x>250</x>
-     <y>10</y>
-     <width>601</width>
+     <x>230</x>
+     <y>30</y>
+     <width>611</width>
      <height>81</height>
     </rect>
    </property>

Sources/Widgets/ConnectorTestVisualizationWidget.cpp

@@ -4,6 +4,7 @@
 CConnectorTestVisualizationWidget::CConnectorTestVisualizationWidget(QWidget *parent) :
     QWidget(parent)
 {
+    mPinClicksEnabled = false;
 }
 
 int CConnectorTestVisualizationWidget::SetConnectorPinCount(int Count)
@@ -21,7 +22,8 @@ int CConnectorTestVisualizationWidget::SetConnectorPinCount(int Count)
     for(int i = 0; i < Count; i++)
     {
        QString pin = QString("%1").arg(i+1);
-       NewWidget = new CONOFFStatusWidget(CONOFFStatusWidget::ON_OFF_LED_COLOR_GREEN,this,pin);
+       NewWidget = new CONOFFStatusWidget(CONOFFStatusWidget::ON_OFF_LED_COLOR_GREEN,i+1,this,pin);
+       connect(NewWidget,SIGNAL(Clicked(int)),this,SLOT(ONOFFLedClicked(int)));
        NewWidget->resize(ON_OFF_WIDGET_SIZE,ON_OFF_WIDGET_SIZE);
 
 //       NewWidget->move((col)*(ON_OFF_WIDGET_SIZE + col_offset),((row) * (ON_OFF_WIDGET_SIZE + row_offset)));
@@ -52,3 +54,46 @@ int CConnectorTestVisualizationWidget::ClearConnectorsLists()
 
     return RET_OK;
 }
+
+int CConnectorTestVisualizationWidget::EnablePinClicks()
+{
+    mPinClicksEnabled = true;
+    return RET_OK;
+}
+
+int CConnectorTestVisualizationWidget::DisablePinClicks()
+{
+    mPinClicksEnabled = false;
+    return RET_OK;
+}
+
+void CConnectorTestVisualizationWidget::ONOFFLedClicked(int Index)
+{
+    if(mPinClicksEnabled)
+    {
+        emit PinClicked(Index);
+    }
+}
+
+int CConnectorTestVisualizationWidget::SetConnectorPinStates(QBitArray PinStates)
+{
+    if(PinStates.size() != mPinsWidgetsList.size())
+    {
+        qDebug("Erreur de logique dans CConnectorTestVisualizationWidget::SetConnectorPinStates; taille des connecteurs incohérente");
+        return RET_ERROR;
+    }
+
+    if(mPinsWidgetsList.size() == 0)
+    {
+        return RET_OK;
+    }
+
+    for(int i = 0; i < mPinsWidgetsList.size(); i++)
+    {
+        mPinsWidgetsList.at(i)->SetState(PinStates.at(i));
+    }
+
+    return RET_OK;
+}
+
+

Sources/Widgets/ConnectorTestVisualizationWidget.h

@@ -3,8 +3,9 @@
 
 #include <QWidget>
 #include "ONOFFStatusWidget.h"
-#include <QList>
 #include "CableTestBenchDefs.h"
+#include <QList>
+#include <QBitArray>
 
 #define ON_OFF_WIDGET_SIZE 30
 #define LED_PER_LINE_COUNT 10
@@ -16,14 +17,28 @@ public:
 
     QList<CONOFFStatusWidget*> mPinsWidgetsList;
 
+
+
     int SetConnectorPinCount(int count);
 
     int ClearConnectorsLists();
+    int DisablePinClicks();
+    int EnablePinClicks();
+
+    int SetConnectorPinStates(QBitArray PinStates);
+
+
+
     
 signals:
     
+    void PinClicked(int PinNbr);
+
+private:
+    bool mPinClicksEnabled;
 public slots:
 
+    void ONOFFLedClicked(int Index);
     
 };
 

Sources/Widgets/ONOFFStatusWidget.cpp

@@ -18,7 +18,7 @@
 #include "ONOFFStatusWidget.h"
 #include <QPainter>
 
-CONOFFStatusWidget::CONOFFStatusWidget(eONOFFLedColor Color, QWidget *Parent, QString Label)
+CONOFFStatusWidget::CONOFFStatusWidget(eONOFFLedColor Color,int index, QWidget *Parent,QString Label)
 {
     setParent(Parent);
     if(Color == ON_OFF_LED_COLOR_GREEN)
@@ -34,6 +34,9 @@ CONOFFStatusWidget::CONOFFStatusWidget(eONOFFLedColor Color, QWidget *Parent, QS
 
     mLabel = new QLabel(Label,this);
     mLabel->move(0,15);
+
+    mIndex = index;
+    mIsOn = false;
 }
 
 CONOFFStatusWidget::~CONOFFStatusWidget()
@@ -42,17 +45,34 @@ CONOFFStatusWidget::~CONOFFStatusWidget()
 
 void CONOFFStatusWidget::SetON()
 {
-    IsOn = true;
+    if(mIsOn == false)
+    {
+        mIsOn = true;
+        repaint();
+    }
 }
 
 void CONOFFStatusWidget::SetOFF()
 {
-    IsOn = true;
+    if(mIsOn == true)
+    {
+        mIsOn = false;
+        repaint();
+    }
+}
+
+void CONOFFStatusWidget::SetState(bool IsON)
+{
+    if(IsON != mIsOn)   //don't repaint if not necessary
+    {
+        mIsOn = IsON;
+        repaint();
+    }
 }
 
 void CONOFFStatusWidget::Toggle()
 {
-    if(IsOn)
+    if(mIsOn)
 	{
         SetOFF();
 	}
@@ -66,13 +86,13 @@ void CONOFFStatusWidget::paintEvent(QPaintEvent *PaintEvent)
 {
     QPainter painter(this);
 
-    if(IsOn)
+    if(mIsOn)
     {
         painter.drawPixmap(0,0,mLedOnPixmap);
     }
     else
     {
-        painter.drawPixmap(0,0,mLedOnPixmap);
+        painter.drawPixmap(0,0,mLedOffPixmap);
     }
 }
 
@@ -99,3 +119,8 @@ void CONOFFStatusWidget::resizeEvent(QResizeEvent *event)
     mLabel->move((width/2)-(LabelWidth/2),height);
 
 }
+
+void CONOFFStatusWidget::mouseReleaseEvent(QMouseEvent *event)
+{
+    emit Clicked(mIndex);
+}

Sources/Widgets/ONOFFStatusWidget.h

@@ -19,24 +19,29 @@ public:
         ON_OFF_LED_COLOR_RED
     };
 
-    CONOFFStatusWidget(eONOFFLedColor Color, QWidget *Parent = NULL,QString Label = QString());
+    CONOFFStatusWidget(eONOFFLedColor Color,int index = -1, QWidget *Parent = NULL,QString Label = QString());
 	~CONOFFStatusWidget();
     void paintEvent(QPaintEvent *PaintEvent);
     void resizeEvent(QResizeEvent *);
+    void mouseReleaseEvent(QMouseEvent *event);
 
     QLabel *mLabel;
     QPixmap mLedOnPixmap,mLedOffPixmap;
 
-    bool IsOn;
+    bool mIsOn;
 
 	void SetON();
 	void SetOFF();
 	void Toggle();
+    void SetState(bool IsON);
 
+    int mIndex;
 
 
 
-public slots:
+
+signals:
+    void Clicked(int index);
 
 
 

object_script.CableTestBench.Debug

@@ -17,6 +17,10 @@ INPUT(
 ./debug\OptionsPage.o
 ./debug\CableTestBenchDefs.o
 ./debug\IOModulesInterface.o
+./debug\InputConnector.o
+./debug\OutputConnector.o
+./debug\CableParametersData.o
+./debug\AutomatedTestReport.o
 ./debug\moc_MainWindow.o
 ./debug\moc_MainPage.o
 ./debug\moc_CableTestBench.o
@@ -26,5 +30,8 @@ INPUT(
 ./debug\moc_ConnectorClickZoneWidget.o
 ./debug\moc_ONOFFStatusWidget.o
 ./debug\moc_ConnectorTestVisualizationWidget.o
+./debug\moc_CableTestEngine.o
 ./debug\moc_OptionsPage.o
+./debug\moc_IOModulesInterface.o
+./debug\moc_AutomatedTestReport.o
 );

object_script.CableTestBench.Release

@@ -17,6 +17,10 @@ INPUT(
 ./release\OptionsPage.o
 ./release\CableTestBenchDefs.o
 ./release\IOModulesInterface.o
+./release\InputConnector.o
+./release\OutputConnector.o
+./release\CableParametersData.o
+./release\AutomatedTestReport.o
 ./release\moc_MainWindow.o
 ./release\moc_MainPage.o
 ./release\moc_CableTestBench.o
@@ -26,5 +30,8 @@ INPUT(
 ./release\moc_ConnectorClickZoneWidget.o
 ./release\moc_ONOFFStatusWidget.o
 ./release\moc_ConnectorTestVisualizationWidget.o
+./release\moc_CableTestEngine.o
 ./release\moc_OptionsPage.o
+./release\moc_IOModulesInterface.o
+./release\moc_AutomatedTestReport.o
 );

ui_CMainPage.h

@@ -1,7 +1,7 @@
 /********************************************************************************
 ** Form generated from reading UI file 'CMainPage.ui'
 **
-** Created: Fri May 3 10:58:09 2019
+** Created: Wed May 8 10:13:26 2019
 **      by: Qt User Interface Compiler version 4.8.1
 **
 ** WARNING! All changes made in this file will be lost when recompiling UI file!

ui_CableTestPage.h

@@ -1,7 +1,7 @@
 /********************************************************************************
 ** Form generated from reading UI file 'CableTestPage.ui'
 **
-** Created: Fri May 3 10:58:09 2019
+** Created: Wed May 8 11:18:26 2019
 **      by: Qt User Interface Compiler version 4.8.1
 **
 ** WARNING! All changes made in this file will be lost when recompiling UI file!
@@ -18,6 +18,7 @@
 #include <QtGui/QComboBox>
 #include <QtGui/QFrame>
 #include <QtGui/QGridLayout>
+#include <QtGui/QGroupBox>
 #include <QtGui/QHeaderView>
 #include <QtGui/QLabel>
 #include <QtGui/QLineEdit>
@@ -57,11 +58,14 @@ public:
     QLabel *mOutputContactsTextLabel;
     QPushButton *mNewCableBtn;
     QFrame *frame;
-    QPushButton *mStartTestBtn;
-    QPushButton *mReinitTestBtn;
     QCheckBox *mCableIdentStepChkBx;
     QCheckBox *mVisualInspStepChkBx;
     QCheckBox *mConSelStepChkBx;
+    QGroupBox *groupBox;
+    QPushButton *mStartTestBtn;
+    QPushButton *mReinitTestBtn;
+    QGroupBox *groupBox_2;
+    QPushButton *mStartManualTestBtn;
     QLabel *mInspVisuelleLabel_2;
     QTextBrowser *mTestLogTextBox;
 
@@ -153,7 +157,7 @@ public:
         mInspectionDoneIcon->setGeometry(QRect(160, 20, 101, 91));
         mInputTestVisualisationWidget = new CConnectorTestVisualizationWidget(CCableTestPage);
         mInputTestVisualisationWidget->setObjectName(QString::fromUtf8("mInputTestVisualisationWidget"));
-        mInputTestVisualisationWidget->setGeometry(QRect(10, 410, 471, 351));
+        mInputTestVisualisationWidget->setGeometry(QRect(10, 410, 461, 351));
         mInputTestVisualisationWidget->setAutoFillBackground(false);
         line = new QFrame(CCableTestPage);
         line->setObjectName(QString::fromUtf8("line"));
@@ -162,11 +166,11 @@ public:
         line->setFrameShadow(QFrame::Sunken);
         mOutputTestVisualisationWidget = new CConnectorTestVisualizationWidget(CCableTestPage);
         mOutputTestVisualisationWidget->setObjectName(QString::fromUtf8("mOutputTestVisualisationWidget"));
-        mOutputTestVisualisationWidget->setGeometry(QRect(510, 410, 441, 351));
+        mOutputTestVisualisationWidget->setGeometry(QRect(500, 410, 461, 351));
         mOutputTestVisualisationWidget->setAutoFillBackground(false);
         line_2 = new QFrame(CCableTestPage);
         line_2->setObjectName(QString::fromUtf8("line_2"));
-        line_2->setGeometry(QRect(490, 390, 20, 371));
+        line_2->setGeometry(QRect(480, 390, 20, 371));
         line_2->setFrameShape(QFrame::VLine);
         line_2->setFrameShadow(QFrame::Sunken);
         mInputContactsTextLabel = new QLabel(CCableTestPage);
@@ -184,15 +188,9 @@ public:
         mNewCableBtn->setGeometry(QRect(430, 20, 91, 23));
         frame = new QFrame(CCableTestPage);
         frame->setObjectName(QString::fromUtf8("frame"));
-        frame->setGeometry(QRect(50, 220, 471, 131));
+        frame->setGeometry(QRect(50, 220, 491, 131));
         frame->setFrameShape(QFrame::Box);
         frame->setFrameShadow(QFrame::Raised);
-        mStartTestBtn = new QPushButton(frame);
-        mStartTestBtn->setObjectName(QString::fromUtf8("mStartTestBtn"));
-        mStartTestBtn->setGeometry(QRect(260, 20, 91, 23));
-        mReinitTestBtn = new QPushButton(frame);
-        mReinitTestBtn->setObjectName(QString::fromUtf8("mReinitTestBtn"));
-        mReinitTestBtn->setGeometry(QRect(260, 70, 91, 23));
         mCableIdentStepChkBx = new QCheckBox(frame);
         mCableIdentStepChkBx->setObjectName(QString::fromUtf8("mCableIdentStepChkBx"));
         mCableIdentStepChkBx->setGeometry(QRect(20, 20, 151, 17));
@@ -205,6 +203,21 @@ public:
         mConSelStepChkBx->setObjectName(QString::fromUtf8("mConSelStepChkBx"));
         mConSelStepChkBx->setGeometry(QRect(20, 80, 191, 17));
         mConSelStepChkBx->setCheckable(false);
+        groupBox = new QGroupBox(frame);
+        groupBox->setObjectName(QString::fromUtf8("groupBox"));
+        groupBox->setGeometry(QRect(230, 10, 121, 91));
+        mStartTestBtn = new QPushButton(groupBox);
+        mStartTestBtn->setObjectName(QString::fromUtf8("mStartTestBtn"));
+        mStartTestBtn->setGeometry(QRect(20, 20, 91, 23));
+        mReinitTestBtn = new QPushButton(groupBox);
+        mReinitTestBtn->setObjectName(QString::fromUtf8("mReinitTestBtn"));
+        mReinitTestBtn->setGeometry(QRect(20, 50, 91, 23));
+        groupBox_2 = new QGroupBox(frame);
+        groupBox_2->setObjectName(QString::fromUtf8("groupBox_2"));
+        groupBox_2->setGeometry(QRect(370, 10, 111, 80));
+        mStartManualTestBtn = new QPushButton(groupBox_2);
+        mStartManualTestBtn->setObjectName(QString::fromUtf8("mStartManualTestBtn"));
+        mStartManualTestBtn->setGeometry(QRect(20, 30, 75, 23));
         mInspVisuelleLabel_2 = new QLabel(CCableTestPage);
         mInspVisuelleLabel_2->setObjectName(QString::fromUtf8("mInspVisuelleLabel_2"));
         mInspVisuelleLabel_2->setGeometry(QRect(50, 200, 221, 20));
@@ -250,14 +263,17 @@ public:
         mInputContactsTextLabel->setText(QApplication::translate("CCableTestPage", "Contacts entr\303\251e", 0, QApplication::UnicodeUTF8));
         mOutputContactsTextLabel->setText(QApplication::translate("CCableTestPage", "Contacts sortie", 0, QApplication::UnicodeUTF8));
         mNewCableBtn->setText(QApplication::translate("CCableTestPage", "Nouveau C\303\242ble", 0, QApplication::UnicodeUTF8));
-        mStartTestBtn->setText(QApplication::translate("CCableTestPage", "D\303\251marrer test", 0, QApplication::UnicodeUTF8));
-        mReinitTestBtn->setText(QApplication::translate("CCableTestPage", "R\303\251initialiser test", 0, QApplication::UnicodeUTF8));
         mCableIdentStepChkBx->setText(QApplication::translate("CCableTestPage", "1. Identification du c\303\242ble", 0, QApplication::UnicodeUTF8));
 #ifndef QT_NO_TOOLTIP
         mVisualInspStepChkBx->setToolTip(QString());
 #endif // QT_NO_TOOLTIP
         mVisualInspStepChkBx->setText(QApplication::translate("CCableTestPage", "2. Inspection visuelle", 0, QApplication::UnicodeUTF8));
         mConSelStepChkBx->setText(QApplication::translate("CCableTestPage", "3. S\303\251lection du connecteur d'entr\303\251e", 0, QApplication::UnicodeUTF8));
+        groupBox->setTitle(QApplication::translate("CCableTestPage", "Test Automatique", 0, QApplication::UnicodeUTF8));
+        mStartTestBtn->setText(QApplication::translate("CCableTestPage", "D\303\251marrer test", 0, QApplication::UnicodeUTF8));
+        mReinitTestBtn->setText(QApplication::translate("CCableTestPage", "R\303\251initialiser test", 0, QApplication::UnicodeUTF8));
+        groupBox_2->setTitle(QApplication::translate("CCableTestPage", "Test Manuel", 0, QApplication::UnicodeUTF8));
+        mStartManualTestBtn->setText(QApplication::translate("CCableTestPage", "Ex\303\251cuter", 0, QApplication::UnicodeUTF8));
         mInspVisuelleLabel_2->setText(QApplication::translate("CCableTestPage", "Contr\303\264le du test \303\251lectrique", 0, QApplication::UnicodeUTF8));
     } // retranslateUi
 

ui_OptionsPage.h

@@ -1,7 +1,7 @@
 /********************************************************************************
 ** Form generated from reading UI file 'OptionsPage.ui'
 **
-** Created: Fri May 3 10:58:09 2019
+** Created: Wed May 8 10:13:26 2019
 **      by: Qt User Interface Compiler version 4.8.1
 **
 ** WARNING! All changes made in this file will be lost when recompiling UI file!
@@ -14,6 +14,7 @@
 #include <QtGui/QAction>
 #include <QtGui/QApplication>
 #include <QtGui/QButtonGroup>
+#include <QtGui/QCheckBox>
 #include <QtGui/QHeaderView>
 #include <QtGui/QLabel>
 #include <QtGui/QPushButton>
@@ -37,6 +38,7 @@ public:
     QSpinBox *mIPAdd4SpinBox;
     QLabel *label_5;
     QPushButton *mApplyAndSaveBtn;
+    QCheckBox *mIgnoreVisualInspChkBx;
 
     void setupUi(QWidget *COptionsPage)
     {
@@ -101,6 +103,9 @@ public:
         mApplyAndSaveBtn = new QPushButton(COptionsPage);
         mApplyAndSaveBtn->setObjectName(QString::fromUtf8("mApplyAndSaveBtn"));
         mApplyAndSaveBtn->setGeometry(QRect(390, 550, 131, 23));
+        mIgnoreVisualInspChkBx = new QCheckBox(COptionsPage);
+        mIgnoreVisualInspChkBx->setObjectName(QString::fromUtf8("mIgnoreVisualInspChkBx"));
+        mIgnoreVisualInspChkBx->setGeometry(QRect(500, 200, 221, 17));
 
         retranslateUi(COptionsPage);
 
@@ -116,6 +121,7 @@ public:
         label_4->setText(QApplication::translate("COptionsPage", "Temps de maintien bas (ms)", 0, QApplication::UnicodeUTF8));
         label_5->setText(QApplication::translate("COptionsPage", "Adresse IP module I/O", 0, QApplication::UnicodeUTF8));
         mApplyAndSaveBtn->setText(QApplication::translate("COptionsPage", "Appliquer && Sauvegarder", 0, QApplication::UnicodeUTF8));
+        mIgnoreVisualInspChkBx->setText(QApplication::translate("COptionsPage", "Ignorer l'inspection visuelle", 0, QApplication::UnicodeUTF8));
     } // retranslateUi
 
 };

ui_VisualInspectionPage.h

@@ -1,7 +1,7 @@
 /********************************************************************************
 ** Form generated from reading UI file 'VisualInspectionPage.ui'
 **
-** Created: Fri May 3 10:58:09 2019
+** Created: Wed May 8 10:13:26 2019
 **      by: Qt User Interface Compiler version 4.8.1
 **
 ** WARNING! All changes made in this file will be lost when recompiling UI file!
@@ -57,7 +57,7 @@ public:
         CVisualInspectionPage->resize(1103, 710);
         label = new QLabel(CVisualInspectionPage);
         label->setObjectName(QString::fromUtf8("label"));
-        label->setGeometry(QRect(250, 10, 601, 81));
+        label->setGeometry(QRect(230, 30, 611, 81));
         QFont font;
         font.setPointSize(14);
         label->setFont(font);