CableTestBench/Sources/SeaMaxWin/Include/SeaMAX.h

#ifndef __SEAMAX_H__
#define __SEAMAX_H__

#ifdef LINUX
#include "wincompat.h"
#endif

typedef void *LPVOID;

#define SM_HANDLE	void*
#define SME_HANDLE	void*
#define SDL_HANDLE	void*

/// \page	Enumerations	Global Types and Enumerations.
///			Listed here are the types, enumerations, and definitions used throughout the %SeaMAX library.
/// 
///	\section	semax_enumerations	SeaMAX Enumerations
///
/// \subsection sm_deviceconfig	DeviceConfig
/// \code
typedef struct configuration
{
	int model;
	int commType;
	int baudrate;
	int parity;
	int firmware;
} DeviceConfig;
/// \endcode

extern "C"
{
	extern int __stdcall SM_Version(int* major, int* minor, int* revision, int* build);
	extern int __stdcall SM_Open(SM_HANDLE* handle, char* connection);
	extern int __stdcall SM_ConfigureSerialConnection(SM_HANDLE handle, int baudrate, int parity);
	extern int __stdcall SM_ConfigureSerialTimeouts(SM_HANDLE handle, int multiple, int constant, int interval);
	extern int __stdcall SM_SelectDevice(SM_HANDLE handle, int slaveID);
	extern int __stdcall SM_GetDeviceConfig(SM_HANDLE handle, DeviceConfig* config);
	extern int __stdcall SM_Close(SM_HANDLE handle);
	extern int __stdcall SM_GetAnalogInputConfig(SM_HANDLE handle, unsigned char* reference, unsigned char* mode);
	extern int __stdcall SM_GetAnalogInputRanges(SM_HANDLE handle, unsigned char* ranges);
	extern int __stdcall SM_SetAnalogInputConfig(SM_HANDLE handle, unsigned char reference, unsigned char mode);
	extern int __stdcall SM_SetAnalogInputRanges(SM_HANDLE handle, unsigned char* ranges);
	extern int __stdcall SM_GetAnalogOutputRanges(SM_HANDLE handle, unsigned char* ranges);
	extern int __stdcall SM_GetPIOPresets(SM_HANDLE handle, unsigned char* config);
	extern int __stdcall SM_SetPIOPresets(SM_HANDLE handle, unsigned char* config);
	extern int __stdcall SM_GetPIODirection(SM_HANDLE handle, unsigned char* config);
	extern int __stdcall SM_SetPIODirection(SM_HANDLE handle, unsigned char* config);
	extern int __stdcall SM_ReadPIO(SM_HANDLE handle, unsigned char* values);
	extern int __stdcall SM_WritePIO(SM_HANDLE handle, unsigned char* values);
	extern int __stdcall SM_SetCommunications(SM_HANDLE handle, int baudrate, int parity);
	extern int __stdcall SM_SetSoftwareAddress(SM_HANDLE handle, int slaveID);	
	extern int __stdcall SM_ReadDigitalInputs(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_ReadAnalogInputs(SM_HANDLE handle, int start, int number, double* analogValues, unsigned char* ranges, unsigned char *byteValues);
	extern int __stdcall SM_WriteDigitalOutputs(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_ReadDigitalOutputs(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_WriteAnalogOutputs(SM_HANDLE handle, int start, int number, double* analogValues, unsigned char* ranges, unsigned char *byteValues);	
	extern int __stdcall SM_SetBridgeType(SM_HANDLE handle, int bridgeType);
	// Customer specific methods (Oncology Inc.)
	extern int __stdcall SM_GlobalCommsReset(SM_HANDLE handle);

#ifndef LINUX
	extern int __stdcall SM_NotifyInputState(SM_HANDLE handle, int cancel);
	extern int __stdcall SM_NotifyOnInputChange(SM_HANDLE handle, int start, int number, unsigned char* values, int delay, int blocking);
#endif

	// Deprecated Functions
	extern int __stdcall SM_GetConfig(SM_HANDLE handle, int* model, int* commType, int* baudrate, int* parity);
	extern int __stdcall SM_ReadDiscreteInputs(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_ReadHoldingRegisters(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_ReadInputRegisters(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_WriteCoils(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_ReadCoils(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_WriteHoldingRegisters(SM_HANDLE handle, int start, int number, unsigned char *values);
	extern int __stdcall SM_GetADDAExtendedConfig(SM_HANDLE handle, int* multiplierEnabled, unsigned char* daConfig);
	extern int __stdcall SM_SetADDAConfig(SM_HANDLE handle, unsigned char* deviceConfig, unsigned char* channelsConfig);
	extern int __stdcall SM_GetADDAConfig(SM_HANDLE handle, unsigned char* deviceConfig, unsigned char* channelsConfig);
	extern int __stdcall SM_AtoDConversion(SM_HANDLE handle, double *value, unsigned char *data, int channelRange);
	extern int __stdcall SM_DtoAConversion(SM_HANDLE handle, double value, unsigned char *data, int channelRange);

	extern int __stdcall SME_Initialize(SME_HANDLE* handle);
	extern int __stdcall SME_Cleanup(SME_HANDLE handle);
	extern int __stdcall SME_SearchForModules(SME_HANDLE handle);
	extern int __stdcall SME_FirstModule(SME_HANDLE handle);
	extern int __stdcall SME_NextModule(SME_HANDLE handle);	
	extern int __stdcall SME_Ping(SME_HANDLE handle);
	extern int __stdcall SME_ModuleByName(SME_HANDLE handle, char* moduleName);
	extern int __stdcall SME_ModuleByIP(SME_HANDLE handle, char* ipAddress);
	extern int __stdcall SME_ModuleByMAC(SME_HANDLE handle, char* mac);
	extern int __stdcall SME_ModuleCount(SME_HANDLE handle);
	extern int __stdcall SME_GetName(SME_HANDLE handle, char* moduleName);
	extern int __stdcall SME_GetNetworkConfig(SME_HANDLE handle, char* ipAddress, char* netmask, char* gateway);
	extern int __stdcall SME_GetNetworkConfigBytes(SME_HANDLE handle, unsigned char* ipAddress, unsigned char* netmask, unsigned char* gateway);
	extern int __stdcall SME_GetMACAddress(SME_HANDLE handle, char* address);
	extern int __stdcall SME_GetDHCPConfig(SME_HANDLE handle, int* status);
	extern int __stdcall SME_GetType(SME_HANDLE handle, char* type);
	extern int __stdcall SME_GetFirmwareVersion(SME_HANDLE handle, int* major, int* minor);
	extern int __stdcall SME_GetNetworkSerialParams(SME_HANDLE handle, int* baudrate, int* parity);
	extern int __stdcall SME_SetName(SME_HANDLE handle, char *name);
	extern int __stdcall SME_SetNetworkConfig(SME_HANDLE handle, char* ipAddress, char* netmask, char* gateway);
	extern int __stdcall SME_SetNetworkConfigBytes(SME_HANDLE handle, unsigned char* ipAddress, unsigned char* netmask, unsigned char* gateway);
	extern int __stdcall SME_SetDHCPConfig(SME_HANDLE handle, int status);
	extern int __stdcall SME_RebootModule(SME_HANDLE handle);
	extern int __stdcall SME_SetNetworkSerialParams(SME_HANDLE handle, int baudrate, int parity);
	extern int __stdcall SME_GetNetworkSerialParams(SME_HANDLE handle, int* baudrate, int* parity);
	extern int __stdcall SME_GetWirelessConfig(SME_HANDLE handle, int* network, char* SSID, int* channel, int* security, int* keyType);
	extern int __stdcall SME_SetWirelessConfig(SME_HANDLE handle, int network, char* SSID, int channel, int security, int keyType, char* key);
	extern int __stdcall SME_ARPAddress(SME_HANDLE handle, char* ipAddress);
	extern int __stdcall SME_IsReachable(SME_HANDLE handle);

	extern int __stdcall SDL_Initialize(SDL_HANDLE* handle);
	extern int __stdcall SDL_Cleanup(SDL_HANDLE handle);
	extern int __stdcall SDL_SearchForDevices(SDL_HANDLE handle);
	extern int __stdcall SDL_FirstDevice(SDL_HANDLE handle);
	extern int __stdcall SDL_NextDevice(SDL_HANDLE handle);
	extern int __stdcall SDL_DeviceCount(SDL_HANDLE handle);
	extern int __stdcall SDL_GetName(SDL_HANDLE handle, char* deviceName);
	extern int __stdcall SDL_GetModel(SDL_HANDLE handle, int* model);
	extern int __stdcall SDL_GetDeviceID(SDL_HANDLE handle, int* id);
	extern int __stdcall SDL_GetSerial(SDL_HANDLE handle, char* serialNumber);
	extern int __stdcall SDL_GetNameBySerial(SDL_HANDLE handle, char* serialNumber, char* deviceName);


}




#ifndef ENUMERATIONS
#define ENUMERATIONS

///
/// \page	Enumerations
///	\subsection	sm_baudrates	Baudrates
///
/// \code
enum
{
    SM_BAUD_INVALID     = 0,
    SM_BAUD_1200        = 1,
    SM_BAUD_2400        = 2,
    SM_BAUD_4800        = 3,
    SM_BAUD_9600        = 4,
    SM_BAUD_14400       = 5,
    SM_BAUD_19200       = 6,
    SM_BAUD_28800       = 7,
    SM_BAUD_38400       = 8,
    SM_BAUD_57600       = 9,
    SM_BAUD_115200      = 10
};
/// \endcode
///
/// \page	Enumerations
///	\subsection sm_databits	Databits
///	\code
enum
{
    SM_DATABITS_5   = 5,
    SM_DATABITS_6   = 6,
    SM_DATABITS_7   = 7,
    SM_DATABITS_8   = 8
};
/// \endcode
///
/// \page	Enumerations
/// \subsection sm_parity	Parity
/// \code
enum 
{
    SM_PARITY_NONE      = 0,
    SM_PARITY_ODD       = 1,
    SM_PARITY_EVEN      = 2,
    SM_PARITY_MARK      = 3,
    SM_PARITY_SPACE     = 4
};
/// \endcode
///
/// \page	Enumerations
/// \subsection	sm_stopbits	Stopbits
/// \code
enum 
{ 
    SM_STOPBITS_1       = 0,
    SM_STOPBITS_1_5     = 1, 
    SM_STOPBITS_2       = 2
};
/// \endcode
///
/// \page	Enumerations
/// \subsection sm_comtype	Communications Type
/// \code
enum 
{ 
    SM_COMTYPE_RS485        = 0, 
    SM_COMTYPE_ETHERNET     = 1, 
    SM_COMTYPE_USB          = 2, 
    SM_COMTYPE_RS232        = 3,
    SM_COMTYPE_EXPANSION    = 4, 
    SM_COMTYPE_RS422        = 5,
    SM_COMTYPE_WIRELESS     = 6,
    SM_COMTYPE_INTELLIGENT  = 7,
    SM_COMTYPE_P_O_ETH      = 8,
    SM_COMTYPE_P_O_USB      = 9
};
/// \endcode
///
/// \subsection	ad_reference Analog to Digital Voltage Reference
/// \code
enum
{
    ANALOG          = 0,
    GROUND          = 1,
    AD_REFERENCE    = 2,
    FLOATING        = 3,
    DA_CHANNEL_1    = 4,
    DA_CHANNEL_2    = 8
};
/// \endcode
///
/// \subsection	ad_channel_modes Analog to Digital Channel Modes
/// \code
enum
{
    SINGLE_ENDED    = 0,
    DIFFERENTIAL    = 1,
    CURRENT_LOOP    = 2
};
/// \endcode
///
/// \subsection	channel_ranges Channel Range Values
/// \code
enum
{
    ZERO_TO_FIVE        = 0,
    PLUS_MINUS_FIVE     = 1,
    ZERO_TO_TEN         = 2,
    PLUS_MINUS_TEN      = 3,
    ZERO_TO_FIFTEEN     = 2,
    PLUS_MINUS_FIFTEEN  = 3
};
/// \endcode
///
/// \section sme_enumerations SeaMAX Ethernet Enumerations
///
/// \subsection network_types Network Types
/// \code
enum
{
    NETWORK_INFRASTRUCTURE  = 0,
    NETWORK_ADHOC           = 1
};
/// \endcode
///
/// \subsection security_enum Security Type
/// \code
enum
{
    SECURITY_NONE                       = 0,
    SECURITY_WEP_OPEN_64                = 1,
    SECURITY_WEP_SHARED_64              = 2,
    SECURITY_WEP_OPEN_128               = 3,
    SECURITY_WEP_SHARED_128             = 4,
    SECURITY_WPA_TKIP                   = 5,
    SECURITY_WPA2_AES                   = 6,

    SECURITY_UNKNOWN                    = 0xFF
};
/// \endcode
///
/// \subsection seckey_enum Key Type
/// \code
enum
{
    HEX_KEY             = 0,
    PASSPHRASE_KEY      = 1
    
};
/// \endcode


#endif


#endif